Search results

Today I decided on a new tractor , a LS MT357 with the PowerClutch. I was looking for something bigger than my 2 JDs and with a cab. Plan is to pick it up Saturday morning weather depended. The tires will be switch out to the newer R14 instead of the R4 that are on there. Kinda looking forward...

https://petersoncartridge.com/ballistician-testing-data?search=1 I found this today on their website and find it interesting. You simply enter your cartridge and lot number and tells you a lot about your brass.

With the snow yesterday couldn’t do much outside today. Dug out some old Winchester 240s my brother gave me some time back. I stuffed them on top of 22.8grs of H110. Ready to roll come spring.

The cylinder on my Tracker is anything but perfect. Nocking the empties out is a PITA. I’m looking at using a Flex Hone for firearms for honing. Has anyone here a had success in honing a ruff cylinder with decent outcome?

Getting loads ready for this spring for the 257 Wby. Got some correct headstamped Peterson brass to work with. I picked 4 bullets that Weatherby offered in their factory loads. 110gr ELD-X , 110gr AB , 115gr Bt , and 120gr PT. I found 77grs of N570 fills the case full , was a little...

https://www.bearcreekballistics.com/ Has anyone here have any experience with their bullets? They have a couple that I’m interested in.

Anyone looking for these , they in stock on the Nosler factory seconds page. https://www.nosler.com/35-caliber-250gr-partition-50ct-blem.html

New year new rifle , right? How many members are planning on getting a new firearm or customizing a current one? I’m hoping to have my 378 Wby back this spring. A new barrel is on order for the 458 WM and I’m on the fence on rebarreling the 224 Wby. As far as new , well you never know what may...

Like to see them add a little pre-load into that bipod😁 Got to hand it to the mounting instructions.

Today got around to shoot some of those in my S2 Vanguard. I’m using American Reloading MP-521 powder , sold as BL-C2 equivalent. This stuff has given me good ES in every cartridge I’ve tried it in. Overall I’m satisfied in the outcome on a small work up. 47grs 48grs

$60.05 with tax out the door today at my local FleetFarm. These will set aside for my 378 Wby when it’s finished.

Today I received a holster Patrick made for my Taurus 44. With the red dot installed there wasn’t much out there. I can’t say thank you enough for his workmanship in getting what I wanted.

Questions for those who have use this. How clean does it burn? How is the ES? Accuracy? Muzzle flash? I have a project that I’m working on with my 458WM. I’ve use a lot of Blue Dot and 5744 both of which are hard to find. Any feedback will appreciated. Thanks , Rick

I’ve been toying with the rebarelling of my 458 WM. My thoughts were going to a short (18”) barrel and subsonic for my narrow woods stand. First my bullets never shipped from American Reloading , eventually fully refunded. Then my Trail Boss powder from Sportsman Warehouse got lost , again...

Happy Thanksgiving to all. Will be spending the first half in the stand followed with a dinner with the family.

I recently picked up a MBM brake off of FB Marketplace. Installed it yesterday and today took it for a spin. Vast improvement over the old brake , pistol is very controllable now. Still shoots the 115gr BT load fine , just a shift in POI. Old Brake MBM Brake Todays target

Sportsman’s Warehouse has it available to ship your store. Price is a little ugly. For me it shows 8 available after I made a purchase. https://www.sportsmans.com/shooting-gear-gun-supplies/reloading-equipment-supplies/powder/imr-trail-boss-smokeless-powder-9oz-can/p/1118187

Today I put in 7 1/2hrs changing out the clutch assembly in my boy’s Ford Fiesta. Ford has had a lot of issues with this dual clutch set up. We put the full clutch kit in even though the B-side fork only was bad. Being a salt belt car of 9 years we had quite the chore with corroded hardware...

Today ran a comparison between Fed 215 and CCI BR-2 primers in my boys 30-06 in a Rem 783. I decided to compare my Magnetospeed and Gramin. The Garmin did miss the Fed 215 at 59 grs. The MS was always showed a bit more velocity. As far as the 2 primers the Fed 215 started to show some flattening...

Second bullet I tested today was in the 340 Wby was a flop. Took 3 tries to catch the base. Ran out of jugs to test anymore bullets today. I started with a clean bore with these bullets HBN coated , no cold bore issues. Kinda cool seeing the center undisturbed.