Search results

Thanks. 24” tube gives me a good starting point and should see a little more velocity with a 26”.

Just wondering if I could get a quickload run for the 257 WBY, RL 26, 215m primers, Norma/WBY Brass, and 110 Accubonds and 115 Partitions.

Could I get someone to run a quickload for 257 Weatherby. 115 gr Barnes TSX. Fed 215 M. Norma/Wby Brass. IMR 7828SSC. COAL 3.17". Thanks.

That’s what I was wondering! Thanks for the response b

Would anyone that has the new manual mind posting a photo of the 257 WBY data for 110 and 115 bullets?

Just so I wrap my head around it 49.02 grains is right at where 100% case capacity is correct?

Would it be possible to get someone to run some Quickload info on the 6.5Creedmoor with RL-26 and the 120gr Barnes tsx fed 210 primer and hornaday brass? Thanks.

Ok thanks for the response.

Is there a chance I could get someone to run a Quickload for the 6.5 Creedmoor using Fed 210 primer, Staball powder and 123 Hornady ELDm?

So question on the fill % for the 130 load listed.47.43 shows at 101% case fill, but 48.11 is near maximum. Are the loads listed at near maximum compressed charges?

Is there anyway someone who has QL could run a couple combos for me? 6.5 Creedmoor, Fed 210 Primer, Hornady case, RL-26 for the 130 and 140 Accubond? Thanks

Just like the speed the manuals list the wsm at for 130 and 140s.

If we decide to for sure go the 270wsm route we will be looking at shooting 130 or 140 grain bullets either Barnes or nosler

I am looking at buying a 270wsm for the wife as an elk gun. She shoots the 243 very well already, but I am curious if anyone else out there has any insight on what the recoil is like. I know I have shot a 300wsm and the recoil is nothing like that of the recoil of at 300 win mag. We went to the...

I’m hoping for right at 3000fps. The Hodgon load data page shows 65grains gives 3072fps.

Not sure why they are rotated...

Well I was finally able to make it to the range today. Tested Superformance, H4350 and IMR 4350. Both 4350 were mediocre, but Superformance gave me two different loads that I would have no issues hunting with. I will have to chronograph them later and see which the final load will be.

Looks like Ill start with imr4350

Going to put together a load for a 30-06 and 150 accubonds. I’m think of trying imr 4350, h4350, big game and superformance for powders. Does anyone have any insight on any of these over the others? Bullet weight will be 150 accubonds as that’s what bullet was chosen to shoot. Thanks!

I use 110 Accubonds and H4831. They are going about 3450fps. Nothing walks too far if you do your job. I also have a 115 partition load with H-1000 I have had great success on deer and elk.