Search results

Dr. Mike, Could I ask for you to run a quickoad once again for me. 6mm Rem 70HP TNT Speer Rem Case 24"Barrel 2.820COL RL 19 6mm Rem 70HP TNT Speer Rem Case 24"Barrel 2.820COL IMR4831 Thank You in advance. George

The shoulder dents will blow right back out when you fire the cases, nothing to worry about. I have had some like this.

Once again Dr. Mike Thank You!

243 Win 75 Sierra HP Rem Case 2.685 COL 22" Barrel RL 19 Powder

I voted Sierra, when I started reloading in '76 that is what I started with. Over the ensuing years I have shot Speer, Nosler and Hornady a good number of times but Sierras have always been the best for me for accuracy, deer hunting along with varmint hunting.

Since I started loading in the early 70's I have pretty much stayed with three powders, IMR4064, IMR4831 and Rl19. I have tried others but found for my loads and rifles they have been the best for me over the years. For Primers I started out with CCI, but I found in the early 80's that...

Thank You so much, during the winter I think about and plan what I want to test and use in the spring and summer. I haven't used IMR4831, IMR4054 in my 6mms since 2007 and plan starting use those powders again this year. That is the reason for the requests I have been making. I have two 6mms...

Dr. Mike, I was wondering if you could run a quick load on this for me. Thank You in advance. 6mm Rem 75HP Sierra Rem Case 22" Barrel 2.860 OAL IMR 4831 Powder

It seems as if the 6mm 75HP gets to 3500fps+ with three different powders. IMR 4064, IMR4831 and RL19 all of which I use in it.

Yes, it is! Thank You again Dr. Mike

Dr. Mike, I was wondering if you could run a quick load on this for me. Thank You in advance. 6MM Rem Rem Case 75HP Sierra IMR4064 24" Barrel 2.820COL

Thank You very much Dr. Mike.

Dr. Mike, I was wondering if you could run two different QL's for me. Thank You in advance. 6mm Rem 75HP Sierra IMR 4831 Rem Case 24" Barrel 2.820COL 243 Win 75HP Sierra IMR4831 Rem Case 24" Barrel 2.630COL

300 WSM, I don't know if it helps or not but I am pretty sure it doesn't hurt to do it. You only need to do it once anyhow.

The worst part for me is prepping new brass. I uniform the primer pocket, I deburr the flash hole, I check the length of the new brass and then make sure it is trimmed all to the same length. I only neck size the brass for the first firing and bump the shoulder after that at each loading. I...

Yes, it may very well do that.

What I have always done, and it has worked for me very well. I take an average of max loads and load six different powder charges into 3 shot groups of 2-1/2gr below the projected max up to max. I usually find one charge that gives the best accuracy and load 20 rounds of that charge to ensure...

I reload because it is something that I enjoy doing. Also working to get the most accurate load with different bullets for my rifles.

I have only ever used RCBS shell holders and never had any issues with them.

I have used a RCBS Uniflow measure since 1976 and never had a problem with it.