Search results

The blem prices are typically more than the 2nd prices of the major suppliers .... I think Nosler got tired of blowing them out to the majors who were still making $$$ on them and decided to market the blems at a higher price themselves. Good business decision but not a favorable situation for...

I remember getting blem ballistic tips , 100 per bag, as far back as late 90 s, early 2000 s. $8-10 per bag plus freight! The worlds a changing and not all for the good! Hornady did the same through a wholesaler who is no longer around; those came in a cardboard box! In-expensive too. I...

IMR4831 is NOT a longer grain version of H4831. It s burn rate is faster. It lies between the 4350 and H4831 powders. As others have said it is an excellent powder in a number of cartridges from 22-250 heavy bullets to 300 Win Mag. I ve even had success with it in the 338 WM with heavy bullets...

Not many production rifles. Rem did a couple different runs in 700. In 2002 they did the classic, ran some 700 s in the LS ( laminated stock) model for a year or so. Cooper did some for a while as well as CZ but not a ton around. It’s a great little cartridge in a rifle and with a 40 grain...

We ve been able to keep 108 s alive at 3350 in a 27” tube with a 6-280AI. 110 MK have went past 3400 FPS in a 30” barreled rifle of same caliber. Don’t think your expansion with MK will be as good though but man they shoot flat! We ve had more bullet blowups with the 88 Eldm in 22 caliber...

We ve been able to keep 108 s alive at 3350 in a 27” tube with a 6-280AI. 110 MK have went past 3400 FPS in a 30” barreled rifle of same caliber. Don’t think your expansion with MK will be as good though but man they shoot flat! We ve had more bullet blowups with the 88 Eldm in 22 caliber...

Looks pretty slow burning to me. I d be sure to use a mag primer and might try heavy for caliber bullets to get better performance. Especially in 270 and 06. I bought a bunch of Jeff’s pull down ball powder 25-30 years ago ($8 a pound then!) and it was slower burning than his advertised rate...

Do it as a package deal, 12 primers with 12 bullets and 500 grains of powder for only $99.99 !! :-)

Thank you Dr Mike!

Would someone be kind enough to run a QL prediction with the following components. Wanting to play with some reduced ground squirrel loads in 221 FB. I ve shot them for years in 223 with great accuracy and performance. Thx in advance. 221 Fireball 24” barrel 40 grain and 50 grain BT 1.875 oal...

7828 shows well in the 240 WB with heavier bullets from 95 grs up... as you mentioned a little slow for the lightweight slugs though. Probably 4350 or similar burn rates would perform best with 70-75 gr bullets. If you shoot any 100-105 gr bullets might give R26 a look if you can find it...

That’s great accuracy and a potent load! Handle most everything in NA.... might not be the first choice for large bears but with a calm, accurate shooter it d most likely handle that too. As Dr Mike mentioned you have some room to work up IF you should incline. I load a stout charge of IMR4831...

Nice!

Thank you Dr Mike! Much appreciated.

I ve got a good load of 24 grs of H4895 with a 75 gr Hor hpbt for my 223 but not a lot of H4895 left and I d to keep some of it around. Would someone mind running me a QL with the following inputs; 223 2.375 oal 75 gr Hor hpbt #2279c H380 powder 24” barrel I have about 4 pounds of H380 and I...

Got one; please delete/ignore.

Over the years friend had two 30-378 Weatherbys. One took 113 grs of Retumbo with 180 AB and gave 3425 FPS with. 26” barrel. It was definitely a hot load as primer pockets got loose after the 3rd or 4th firing. Other gun ( first one barrel was gone after about 600-700 rounds) would only take 111...

Thanks Dr Mike! Looks like 12-12.5 grs would be ample to send polishing bullet down the bore. I agree that the bullets would most likely tumble and definitely be inaccurate but goal is to smooth bore. Didn’t want to mess up barrel/twist with a long unstableness bullet but Mr Tubbs said it...

Dr Mike... I ve got a unique situation where a QL prediction could be of great help. Here’s short summary. Wanting to use D Tubbs Final Finish bullets in my new 221 Fireball factory barrel. Have had great luck with David’s product in past. Catch is they re only coating the 77 Sierra MK in 224...

Different employees, different Dept or Store Managers, etc. Folks like that ‘think’ they re helping out but really making the shortage problem and hoarding worse. As far as the re-sellers on Craigs list and other such sites, I ll throw rocks before I put money if their pockets. Hope many...