Search results

canoeblderinmt; this weekend installed a new 3x9 vx-2 on my wifes .243.using 95gr NPT and H-4350. 41.3g to 41.6g had a 6 3/4" spread at 200yds,does this mean it is a bad combo? try the laddertest. moreloader; at any range? i think not! is this not why this post is here?how much "energy" needs...

that would make too much sense :roll: ,to do it the "right way". .. the american way is, you have to buy all the boxes. you are on the right track"higer velocity can make up for a slower twist." here is another sight for you

good shootin' :grin: I also use a .243 with 95 grain partitions with excellent results on whitetails. don't hold your breath on the hat. I usually find the bullet on the far hide. keep the freezer full.

http://precisionlongrangehunter.com/gro ... 2381009531 stoneypoint and sinclair have guages,and a black sharpie and fired case can be just as good. http://www.sinclairintl.com/ base to ojive is most important, high pressure will develope if the bullet is into the lands.

cant remember the correct mix,but vinegar,h2o and a dash of salt. try on a few old cases first.

oal is to the tip. a much better way and more accurate way is the ojive,measure a few bullets,base to tip and you will see why.

lonestar sorry i didnt see where he is having such good luck with BT? i like to eat my deer.they smash them! i saw he is in the midst of load development. mag primers since he is in cold canada have their use,but in .25-06 :roll: ? i simply stated what was best, 100SMK im sure you tried them...

thanks again,now to the first question? leaning back to the 200gr! data is rl-22 nombers. is that the highest velocity powder listed for the 200? 180gr .308 Calculated Table Elevation: 5.055 moa Azimuth: 0.000 moa Range Velocity Energy Momentum Drop Windage Lead Time (yards) (ft/sec)...

thank youy very much mr dean, my main concern is that i want to push the heavier bullet for the heavier mass but if i can't push it fast enough ,i will most likely go with the 180gr,with no regrets!the manual is on the christmas list but the store is an hour away for now.i have an earlier...

thats pretty much my thought,as of now..more details.....this is a APS custom with a 24 3/4" lilja bbl with a break.i was told the nosler #4 manual had AI data but i have not had a chance to get any farther than that.it will be set -up for up to 1k and hence the question on the 180 or 200 AB...

ok,i soaked this post up and it looks over....but to add to it....what about a .30-06 on steroids??? namely .30-06AI on antelope,deer,bear,elk or caribou?? roughly 150fps over the '06?? namely 180-200gr partition or accubond? it looks like the .30mags are using the 180 not the 200. what...

give them a "jump" to the lands. :!: my .25-06 classic coughed at bullets seated any farther out than 3.250(tip). h-4831 fed gmmatch spark in 85ct 100nbt and 115nbt. but 100smk are #1 for tgt and whitetails! 4.5" @500yds :shock: