Search results

  1. 3

    Loading the Accubond

    I had a bit of unexpected results at the range, with 165g Accubonds recently. 308 WIN Win 748 - 47.2gr CCI 250 mag primers Worked up my max at 10 thou off the lands. (Can probably go hotter, especially as I intended to increase the jump to the lands, but noticed some ejector markings at 47.5 -...
  2. 3

    Loading the Accubond

    Hi Been away a while.... Recently picked up some accubond 165g bullets to try in my 308WIN. I'm hoping to check out how they compare to the Partition load I have loaded for years: RP Brass CCI 250 Mag Primers Nosler Partition, 165gr spitzer Win 748 - 47.0 gr OAL - 2.810" If I remember...
  3. 3

    Jump on 30 cal 165gr. PT

    Recently, I had to change primers because of unavailability of CCI 250 in my area. So I switched to Win LRM. I am loading the 165 Partition, 308 Win, Rem brass, 45.5 - 47.5 gr Win748. The CCI primered load was pretty hot at 47gr. The Win primers are showing no signs of pressure whatsoever at...
  4. 3

    The Best Case Lube

    Recently, I got a case stuck something bad in a die. Then did it again, before realizing that a can of "One Shot" had been in the cupboard too long and was no longer doing the job it was supposed to be. I liked the One Shot product because it was easy to use, and was supposed to be...
  5. 3

    Coppering - 2

    Got a question for those of you who know more about it than me..... I have an older electronic bore cleaner. The type you put the rod down the barrel, fill with electrolyte, apply electricity. Uses the copper fouling in the bore to plate the rod, thus removing the copper completely from the...
  6. 3

    Peculiar 1st Cold-barrel Shot

    I have a peculiarity with a particular rifle, a semi-automatic Browning BAR that I have owned for many years. Most groups with a given ammunition (usually I use Remington Core-Lokt 180g - 308 Win -- but the same phenomenon happens with other ammo) will print shots #2, 3, 4, and 5 of a 5-shot...
  7. 3

    Different Primer Produced Unexpected Change

    After a bullet failure from a competitive brand premium bullet last year, I decided to get back to my roots, and load only Nosler Partitions, which have never let me down. My load for my 308Win was always as follows: - Single-lot, R P Brass, partially-sized, and trimmed to 2.010 - CCI 250...
Back
Top