225 Accubond in 338-06

Rob1SG

Beginner
Nov 24, 2004
18
0
How about some load data for this combo. I'd also like the B.C. for this bullet. I'm thinking something like H4350 or Rl 19 as the right powder.Any suggestions on where to start?
 
Sorry Rob, I can't get any of the 225gr bullets to shoot out of my .338-06, finicky bbl. RL19 & H4350 are both great under a 250gr but I'm not sure you can get enough powder in the case to get the 225gr vel. up where it should be. :roll: Try 59gr & work up.
 
Try IMR 4320 starting with 45.5gr and max load at 49.5gr for the .338-06. B.C. is .550 for the .338"/225gr AccuBond. As always start low and work your loads up carefully.
 
Back
Top