25 WSM pressure problems?

[X ring 7mag]

quick question...I bore sighted and shot in a 25 for a friend of mine this evening with factory loads, and in my opinion, this rifle was exhibiting pressure signs that i could not be comfortable with if i had loaded these shells. Flat primers and a very stiff bolt on every shot. Has anyone else experienced this from this caliber?

 

[Sean]

Not with this caliber but with the 270wsm. Almost all factory loads were showing signs of pressure. Haven't had any problems with the 25.

 

[Desert Fox]

Check the fired case for any sign of machining marks. Factory rifles are notorious for rough chamber. Factory don't take time smoothing the chamber after reaming their barrel. Wrap a very fine sandpaper on a wooden dowel that arel snugfit to the rifle chamber and run it back and forth in a twisting motion until all the rough edges smooths out. If this didn't help, sent that ammo back to the factory and have them check it.