25 WSSM load data

huntingmandan

Beginner
Feb 10, 2005
17
0
My new LH 25 WSSM just got here and i need to work up some loads! :grin:

I would like to load the 115/120 gr Partition or the 110 gr AccuBond, as well as some 115 gr BT's.

Anyone have any load data for those?

NOSLER, when will you have the load data published for this cartridge? Maybe post a few loads on this website!!! Thanks!


huntingmandan
 
The hodgdon and IMR websites have some data, but only for a couple bullets. I'm looking for data by Nosler or some of the forum users with 115/120 gr NP or 110 AccuBond. Anyone out there have some info on the 25 WSSM?

Dan
 
We are finishing our data for the 25WSSM. We will post it once it has been proofed.
 
I have a 3/4" - 5 shot group at 100 yds. with the 100 gr. Balistc Tip.

100 Grain Nosler Balistic Tip
41.8 Grains Vargent Powder
200 CCI Primer
2.350" COL
3150 FPS w/ chronograph

The gun is a Winchester Featherweight. I went out as far as 2.363" on COL and lost the accuracy. I COL'd the gun at 2.388" but went back to the 2.350" recomended by IMR for the 115 gr. NBT.

IMR has data on the 85 & 115 NosBT. I got a decent group (1 1/2") w/ 48 grains of IMR 4831 w/ 200 CCI primer & 2.350" COL but have not played with it yet to try & get the group down. It's a compressed load and I like to stay away from them.

I'm in the same boat you are. All the bullets I want to load I can't find data on yet! Good luck.
 
Is there any reloading data for the 25 WSSM ready to be published yet? I'm particularly interested in the 110 AB.
 
Back
Top