May 13, 2016 #1 T TBASTIAN Handloader Jul 1, 2006 372 1 Can a .257 Weatherby action be rebarreled to the new 6.5-.300 Weatherby, or is the action too small? Thanks for the help in advance.
Can a .257 Weatherby action be rebarreled to the new 6.5-.300 Weatherby, or is the action too small? Thanks for the help in advance.
May 13, 2016 #2 A Anonymous Guest Depends on the rifle...look at the back of the magazine. If you have a spacer- you can use the longer cartridge most likely. If it's a MkV action- almost certainly.
Depends on the rifle...look at the back of the magazine. If you have a spacer- you can use the longer cartridge most likely. If it's a MkV action- almost certainly.
May 13, 2016 #3 6 69gto Handloader Mar 6, 2016 274 0 If it is a markv, yes. You will also have to mill the bolt stop groove for more travel because of the longer case on the 6.5-300.
If it is a markv, yes. You will also have to mill the bolt stop groove for more travel because of the longer case on the 6.5-300.
May 13, 2016 #4 FOTIS Range Officer Staff member Oct 30, 2004 24,278 2,989 I can tell you any 300 bee vanguard or other can for sure. But if your 257 bee has a spacer or if you measure your ejection port it should tell you.
I can tell you any 300 bee vanguard or other can for sure. But if your 257 bee has a spacer or if you measure your ejection port it should tell you.
May 21, 2016 #6 S SJB358 Ballistician Dec 24, 2006 32,381 2,998 TBASTIAN":2rflkjrn said: It's a Mark V Fibermark. Click to expand... Should be able to easily.