.260 rem load data

[BAM BAM]

I

need the load data for .260 remington. Also who makes bullets for it? Where can I get them?

 

[DLJ]

B-B,
the best thing you could do is buy a Reloading Manual. Nosler #5 is of course a good one. Your 260 Rem shoots .264"/6.5mm bullets. Most all of the major manufacturers produce bullets for this caliber.
Good Luck

 

[fredj338]

BamBam, every reloading manual currently published has info. on the .260. Bullets of all types are readily available for varmints to cow elk. Get a Nosler #5 & some 120grBTs to start with. H4350, IMR4350, IMR4831 & RL19 are good powders to start with.

 

[martinbns]

I have had great results form H4350 and several bullets. I work up to 46 gr with 120 gr ballistic tips, 45.5 with 125 partitions (my deer load awesomea) and 45 gr witrh 129 gr hornady spirepoints. I haven't tried any 140 gr bullets yet. These loads are freaky accurate in my 700 mountain rifle LSS. The other neat thing is I justload all bullets to the length of the magazine (just over 2.800) which is not even close to the lans.

 

[FOTIS]

http://www.reloadersnest.com/frontpage. ... =112#loads

and www.loadyourown.com

 

[BAM BAM]

B-B,
the best thing you could do is buy a Reloading Manual. Nosler #5 is of course a good one. Your 260 Rem shoots .264"/6.5mm bullets. Most all of the major manufacturers produce bullets for this caliber.
Good Luck

:grin: :grin: :grin: :grin: :lol: :grin: