Looking for loads, my manuals are all too old to show A.C.B.'s Have tried substituting loads for other bullet manufacturers, but gettin' pressure signs. Any and all help would be appreciated! Thanks
My top choice with the 140 gr AccuBond was 65.0 gr Vihtavuori N-165, Federal 210 primer, Winchester case. Near max, so work up carefully. Newest Hornady, Lyman, Nosler, and Sierra manuals have data for the Short Magnums. Other often suggested powders are Magpro, Reloder 22 and 19, and H-4831. I tried those, but had best results with the Vihtavuori N-165, just wish it wasn't so pricey...
you might try shortmags.org there are lots of loads for all the shortmags. Kinda makes you mad about the load books not having loads for the short mags. Good luck hope this helps.