300 win mag

[str8meat]

need a good load with rl-22 and 180 accubonds

 

[nomosendero]

75gr, Fed 215 & W brass

 

[JD338]

75gr, Fed 215 & W brass

++1

nomosendero is spot on.
This load has shot well under MOA in 3 different rifles.

JD338

 

[remingtonman_25_06]

Yep, 75g Rl-22 seems to be the load for 180g bullets and most 300 Win mags.

 

[str8meat]

got any velocity outta a 26 inch tube

 

[normo]

I just picked up a 300 Win Mag Friday, this load answers my question as well for 180gr Accubonds.
Does it work as well with Partitions?

 

[Desert Fox]

Reloader 22 is fine with the 300 Win Mag, but I much prefered H1000 - at least with my Model 70 Laredo. I have better lot to lot consistency with H1000 and they're less affected by temperature changes. That can't be said with Reloader 22.

 

[remingtonman_25_06]

It should still be in the general ballpark with a Partition. Of course not every gun might not like exactly 75, I'd say +/- 1g.

 

[JD338]

I just picked up a 300 Win Mag Friday, this load answers my question as well for 180gr Accubonds.
Does it work as well with Partitions?

Yes, same load shoots sub MOA with 180 gr PT.
Just remember to start low and work up.

JD338

 

[DrMike]

Can't speak for the 300 WM, but my 7mm RM loves 175 grain PTs, shooting them to about 0.3 inch.

 

[FOTIS]

got any velocity outta a 26 inch tube

3000-3100 fps

 

[str8meat]

thanks gentlemen

 

[Mighty Peace]

Mines 74.0gr RL 22 with 180gr AB's and Federal 215 primers works great for me in my Sako m75ss 300WM.....get well under 0.5" groups @ 100 metres if I recall correctly.

Pretty much all 5 touching.

I LIKE IT !!!

As soon as I went up to 74.5 and 75gr loads, the group started to spread out.