filmjunkie4ever
Handloader
- May 4, 2011
- 1,821
- 878
Made it to the range for a quick in and out trip yesterday. I loaded three cartridges into Dad’s Model 70 Classic Sporter .300 WSM which is on loan to me for filling my Damage Control Cow elk tag this year. These are the 150 grain Remington Corelokt Tipped factory ammunition. Like other .300 WSMs I have shot, it required no adjustment to the scope with these new loads. Dad’s rifle was zeroed with 180 grain AccuBond handloads; the Remington factory stuff printed three bullets just under an inch and dead center of the target 1.5” high at 100 yards. Perfect. On to the milk jugs.
To err on the side of caution I lined up six jugs at 100 yards but four is all I needed. I recovered the well expanded bullet from the fourth jug. These cartridges are listed as going in excess of 3300 fps at the muzzle and at 100 yards are still traveling at well above 3000 fps. For that reason I believe, I recovered a bullet weighing 67 grains of the original 150, working out to 44% retention. Not bad for a cup and core bullet flying so fast.
I believe that the better test will come from the field, as usual. Will do a follow up post if/when I recover a bullet from an animal.![IMG_8228.jpeg IMG_8228.jpeg](https://forum.nosler.com/data/attachments/18/18791-93facc73d011bf92c8d027e48d5ab262.jpg)
![IMG_8223.jpeg IMG_8223.jpeg](https://forum.nosler.com/data/attachments/18/18792-5e2f96cc0925d7146b2cdbf2a417b352.jpg)
To err on the side of caution I lined up six jugs at 100 yards but four is all I needed. I recovered the well expanded bullet from the fourth jug. These cartridges are listed as going in excess of 3300 fps at the muzzle and at 100 yards are still traveling at well above 3000 fps. For that reason I believe, I recovered a bullet weighing 67 grains of the original 150, working out to 44% retention. Not bad for a cup and core bullet flying so fast.
I believe that the better test will come from the field, as usual. Will do a follow up post if/when I recover a bullet from an animal.
![IMG_8228.jpeg IMG_8228.jpeg](https://forum.nosler.com/data/attachments/18/18791-93facc73d011bf92c8d027e48d5ab262.jpg)
![IMG_8223.jpeg IMG_8223.jpeg](https://forum.nosler.com/data/attachments/18/18792-5e2f96cc0925d7146b2cdbf2a417b352.jpg)