Was very happy with my 358win is weekend. I had 30 rounds to fire so I had a batch of 50 casesto reload with 225gr PT's. I have suspected but can verify that my rile requires 15-20 rounds put through it to get to its accuray potenial.
I shot two 1.25" 3-shot groups at 200 yards with a 1.5-5 scope. One .5" two holer. This is with an old load using 200gr Spire pt, H322, Win brass, and a Fed 210M primer. Its set to crimp on the cannelure but there is some room to adjust the OCL. (2470fps)
This is the first time I shot the 358 win this year it was cleaned then polished with JB bore bright before it was oiled and stored for the season. After the first 15 rounds it found its consistant and tightest groups.
And now I have a batch of 50 cases to load up some 225gr partitions using H4895. Its the same load I use for the 225gr Hawk but the PT's get to 2430fps with the Hawks do not.
I shot two 1.25" 3-shot groups at 200 yards with a 1.5-5 scope. One .5" two holer. This is with an old load using 200gr Spire pt, H322, Win brass, and a Fed 210M primer. Its set to crimp on the cannelure but there is some room to adjust the OCL. (2470fps)
This is the first time I shot the 358 win this year it was cleaned then polished with JB bore bright before it was oiled and stored for the season. After the first 15 rounds it found its consistant and tightest groups.
And now I have a batch of 50 cases to load up some 225gr partitions using H4895. Its the same load I use for the 225gr Hawk but the PT's get to 2430fps with the Hawks do not.



