.44 Special Hand Loads 21,000 psi or lower

HAWKEYESATX

Handloader
Aug 15, 2016
1,805
63
Hello all!
I have recently picked up a big bore double action revolver. It's a S&W Hand Ejector 2nd Model in .44 Special.
It's a shooter grade, because someone had a knowledgeable gun Smith way back when shorten the barrel from 6.5 inches to 5 inches, and the revolver has been reblued, and summarily had nickel plating put on. The great thing about it is, although it has cosmetic issues, it has been shot, yes, but not abused. She locks up tightly, and still is in time. Not bad for being a girl that is almost 100 years old. The serial number indicates she was made sometime in late '25 to early '26.
I have been reading some things that John Taffin has written about the post WW I S&W revolvers, and he said that the post war revolvers can be loaded to 21k psi, due to the 2nd Model being used in the Great War, and being chambered for the .45 ACP loads of that day.
Now, my question is, does anyone on here have any decent loads that fill that bill of 21k psi or lower?
The powder stash I have is as follows: Unique, 2400, CFE Pistol, Titegroup, AA-7, and IMR 4227.
I believe the optimal bullet weight for the old .44 Special is 200 hrs, if I'm not mistaken.
The bullets I have currently for it are as follows: 180 gr XTP's, 240 gr LSWC HP's, and 200 gr XTP's.
I hope to hear from a lot of people about their favorite loads, and velocities that they have achieved.

Thank you all in advance!

Hawk
e1c2a1e5924f60440a9de9778fa10a73.jpg
f84acf679f1b178d47e7a84d1b220c8d.jpg
090f058bd455c02c744ee485f8ba4bd1.jpg
027db1a71c29ed2cba043380c701f00f.jpg
bed90904d3d74a3072d0a3def9355f07.jpg


Sent from my motorola one using Tapatalk
 
My pet load for the .44 Spl. is 7.5 gr. of Unique and Elmer Keith's bullet, the Lyman #428421.. That's Skeeter Skelton's pet load as well.
The latest Lyman manual shows 6.9 gr. of Unique with #429421 as max at 767 FPS with 13,300 C.U.P. The also show with the Lyman # 429244, 255 gr. bullet using 6.6 gr. Unique for 747 FPS at 13,600 C.U.P.
I've run that 7.5 gr. load in an S&W 624 .44 Spl. and it seems to be a decent load with velocity somewhere around 900 to 950 FPS depending on the individual firearm. FWIW, I also believe that 7.5 gr. Unique load is a favorite of John Taffin as well.
Note that the load is only 0.6 gr. higher than the max load with #429241 and 0.9 gr. over the top load for #429244. I use 7.5 gr. of Unique with both those bullets as I have the molds to make both of them. I do not shoot jacketed bullets in my handguns as a rule. The only exceptions are for ammo in my self defense handguns and I just may go to my home cast bullets in those as well.
Paul B.
 
PJGunner":2gqhd707 said:
My pet load for the .44 Spl. is 7.5 gr. of Unique and Elmer Keith's bullet, the Lyman #428421.. That's Skeeter Skelton's pet load as well.
The latest Lyman manual shows 6.9 gr. of Unique with #429421 as max at 767 FPS with 13,300 C.U.P. The also show with the Lyman # 429244, 255 gr. bullet using 6.6 gr. Unique for 747 FPS at 13,600 C.U.P.
I've run that 7.5 gr. load in an S&W 624 .44 Spl. and it seems to be a decent load with velocity somewhere around 900 to 950 FPS depending on the individual firearm. FWIW, I also believe that 7.5 gr. Unique load is a favorite of John Taffin as well.
Note that the load is only 0.6 gr. higher than the max load with #429241 and 0.9 gr. over the top load for #429244. I use 7.5 gr. of Unique with both those bullets as I have the molds to make both of them. I do not shoot jacketed bullets in my handguns as a rule. The only exceptions are for ammo in my self defense handguns and I just may go to my home cast bullets in those as well.
Paul B.
Thank you PJGunner!
Yes, Taffin likes the 7.5 grs of Unique with the 250 gr Keth bullet.
I think that would work well with my 240 gr LSWC-HP's as well.
I've been thinking about just running lead through mine too.

Sent from my motorola one using Tapatalk
 
Back
Top