Anybody here have experience with these? I got a couple hundred to run through the .243 's I load for. I have them tumbling on moly as I type this. I'm thinking H414 and IMR4166 for top velocities. I don't currently have either. I do have some IMR3031 which looks like it will "work", but I wouldn't buy it just for this application. Hope to smoke some coyotes this winter with these however I've been doing more loading than shooting here lately.
6mm 55gr BT lead free
- Thread starter desertcj
- Start date
desertcj":3gxz9lb7 said:
And you'd be spot on, the 55NBT is the only bullet I use both H414 and W760 interchangeably to exactly the same loads as represented on Hodgdons load data. Other than normal lot to lot checks they are the same.
Not usually a big spherical powder fan but they are IT in this application.
- Thread starter
- #4
- Thread starter
- #5
Loaded up some test rounds today. Fresh Win brass, BR2 primers, molly coated 55gr lead free BT and IMR 3031. Started at 40gr and went up to 44gr in 1/2 gr steps. 42gr is book max. In my Savage model 12, along with moly coated bullets....book max has not proven out to be actual max in any combo I've tried. Hopefully I get to run these through the chronograph next weekend.
- Thread starter
- #7
jmad_81":3nrbb9ll said:
I've read a lot of your .243 posts Jmad. You still shooting that Savage? I've read that H380 and H414 are really good with the 55's. I am a little leary of the temp sensativity of them though. I know that IMR 3031 is nothing special, I just happened to have some. The powders I really want to try in this application are IMR 4166, 8208xbr and Benchmark. CFE 223 looks like it would be good too.
Guy Miner
Master Loader
- Apr 6, 2006
- 17,789
- 6,036
Shot some regular 55 gr Ballistic Tip bullets from our 6mm Rem a few years back.
Accuracy was fair, speed was blistering, and they did a fine job on rockchucks. :mrgreen:
I know it's not the same bullet - but I got real excited about the 55's in a 6mm some years ago and had fun with it. It's well worth trying - and might just be a great bullet for your rifle!
Guy
Accuracy was fair, speed was blistering, and they did a fine job on rockchucks. :mrgreen:
I know it's not the same bullet - but I got real excited about the 55's in a 6mm some years ago and had fun with it. It's well worth trying - and might just be a great bullet for your rifle!
Guy
- Thread starter
- #9
By the way, I read a lot about not being able to seat 55 grain bullets close to the lands because they are so short. Due to the density/lack there of and the resulting length of these bullets I was able to seat these to the same length as the 105gr bullets I've been using at 2.200" to ogive.
Guy Miner
Master Loader
- Apr 6, 2006
- 17,789
- 6,036
Cool.
desertcj":j5mw0lyd said:
I guess I never really worried about the temp sensativity with that round. It was my winter yote round so all I ever used it in was late fall through mid spring then I switched over to the 105 A Max with H1000 for gongs. I don't think that they are hard to get to shoot. I shot Big Game with the 55gr bt for a while as well. Those were the only two powders I tried and I got them both over 3900 and under .5 moa. I would load three different charges with whatever powder you have on hand and see what you gun likes. I bet you find a winner without much hassel.
I shot that barrel out of the 243 and had it rebarreled to a 6.5 saum. I really like that round (have taken deer at 453, and 575 as well as a few yotes at 635, 453, 685, and 710) but miss the fun/very low recoil of a good 6mm. Thinking I might end up with another 6mm something again.
- Thread starter
- #12
- Thread starter
- #13
Similar threads
