Accubond in 7mm WSM

[Dean]

I am looking for loading tables for loading a 160gr AccuBond in 7mm WSM. Can anyone lend any info? :?:

 

[700 bdl]

Look on imr's web site or hodgon's. I got loading data for my 7 mm saum off of those sites.

 

[Dean]

I have been on hodgden and imr's sites. But what i am looking for is some specific loading tables for the 7mm wsm and the 160gr AccuBond. Both Federal and Winchesters factory loads list them at 3125 and 3050fps, but haven't found any load yet that can get me above 2900fps. I was hoping that I would get a response from nosler on this. Their latest reloading manual is so old that it doesn't list the 7mm wsm or the AccuBond bullet. :?:

 

[700 bdl]

Sometimes factory ammo is loaded with a powder not available to the public, and factory velocities are'nt obtainable with current powders. I'm not familiar with the 7mm wsm, but it has to be similar to the 7 mm saum. Good luck! How do you like your short mag so far?

 

[Savage99]

Did you look in www.shortmags.org ?

 

[700 bdl]

In the January '05 issue of Riflemagazine there are some loads for the 160 gr. AccuBond in the 7mm wsm
Hunter-62.5grs.-2937 f.p.s.
H-414 57 grs. 2865 f.p.s.
H-1000 69 grs. -2856 f.p.s.
H-4350 58 grs.-2857 f.p.s.
H-4831 62 grs.-2820 f.p.s.
Magnum 75 grs.-3071 f.p.s.
Retumbo 70.5 grs. 2850 f.p.s.

I don't know if these loads are maximum or not.

 

[NOSLER]

I will post them when we get back into the shop on Tuesday.

 

[Dean]

Hello Nosler just wondering if you forgot about me? You were going to post the load data almost a month ago. :?:

 

[Anonymous]

Sorry it got really busy here. I spoke to our guys working on those loads right now and they said call them at 1(800) 285-3701. They got a few loads for you ready.

 

[FOTIS]

Did you look in www.shortmags.org ?

That is where I go....A plethora of loads for all shorts! :wink: