The Oregonian
Beginner
- Aug 13, 2012
- 11
- 0
I have H4831SC and H4350. I used 4350 from 50gr to 52gr and got flattened primers above 51gr and couldn't get any decent results...high ES on velocity. Hodgdon recommends a max of 49gr.
I am open to Hodgdon 4831 or 4350...actually open to anything, but would prefer to use powders I already have due to lack of availability.
Using Nosler brass, fed 210M in an off the shelf A-bolt with 22" barrel.
Thanks in advance.
I am open to Hodgdon 4831 or 4350...actually open to anything, but would prefer to use powders I already have due to lack of availability.
Using Nosler brass, fed 210M in an off the shelf A-bolt with 22" barrel.
Thanks in advance.