Im looking for a starting point for a 300 win mag using 165 partitions. anyone got a good load. This is for a Mod70 (older) winchester. Id like to keep this below 3100 fps. Its for my buddy and he doesnt handle recoil to well.
Cartridge : .300 Win. Mag.(@)
Bullet : .308, 165, Nosler PART SP 16330
Cartridge O.A.L. L6: 3.340 inch or 84.84 mm
Barrel Length : 24.0 inch or 609.6 mm
Powder : Alliant Reloder-22
Predicted data by increasing and decreasing the given charge,
incremented in steps of 2.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms
Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge
Data for burning rate increased by 10% relative to nominal value:
+Ba 98 76.00 3202 3757 63650 12758 100.0 1.104 !DANGEROUS LOAD-DO NOT USE!
Data for burning rate decreased by 10% relative to nominal value:
-Ba 98 76.00 2821 2916 41830 12290 90.4 1.327
Cartridge : .300 Win. Mag.(@)
Bullet : .308, 165, Nosler PART SP 16330
Cartridge O.A.L. L6: 3.340 inch or 84.84 mm
Barrel Length : 24.0 inch or 609.6 mm
Powder : Hodgdon H4831 SC
Predicted data by increasing and decreasing the given charge,
incremented in steps of 2.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms
Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge
Data for burning rate increased by 10% relative to nominal value:
+Ba 98 76.00 3164 3669 64795 12337 99.3 1.086 !DANGEROUS LOAD-DO NOT USE!
Data for burning rate decreased by 10% relative to nominal value:
-Ba 98 76.00 2799 2869 44310 11448 87.5 1.287
Cartridge : .300 Win. Mag.(@)
Bullet : .308, 165, Nosler PART SP 16330
Cartridge O.A.L. L6: 3.340 inch or 84.84 mm
Barrel Length : 24.0 inch or 609.6 mm
Powder : IMR 4350
Predicted data by increasing and decreasing the given charge,
incremented in steps of 2.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms
Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge
Data for burning rate increased by 10% relative to nominal value:
+Ba 93 68.00 3050 3408 58397 11664 99.5 1.141 ! Near Maximum !
Data for burning rate decreased by 10% relative to nominal value:
-Ba 93 68.00 2726 2723 41398 10963 88.9 1.340