Barrel replacement

[vmam59]

I have a small ring Mauser that was chambered in 7x57. It shot fine but after taking to be re- blued I could never get it to shot straight again. Tried a couple different scopes which I tried on other rifles with no problems. My question is can I change the barrel myself?

 

[salmonchaser]

I saw something on this recently it appears to not be a simple process, takes quite a bit to get the old barrel out. Good luck

 

[sako2]

Check the bedding. The action screws be tightened right. Loosen the screws stand the gun on the butt stock tighten the front screw first.

 

[IdahoCTD]

Prefit barrels for Mausers dont exist because the consistence isnt there from action to action. There are some short chambered barrels around for Mausers and you can rent a reamer + headspace gauge and finish ream it yourself but you need a action wrench and barrel vice to do it all.