bullet
Handloader
- Dec 26, 2007
- 4,975
- 18
double_d":nekeg813 said:bullet":nekeg813 said:Yep, I agree, 48 grains now shoot a five shot group with that load and confirm it and your done.
well, I did just as you suggested(actually 2 5 shot groups)....and it was not too good.....bout a 2" group.....shots 1-3 were at about 3/4" but 4 and 5 went in opposite directions...LOL...second group was scattered all over.
Maybe this one likes to be shot dirty, the real good 48gr group was at the end of the days session.
To be continued....
Foul your bore with at least five to ten shots before you shoot for group. Also, you are describing what might be neck tension causing the problem. If it continues as described above then invest in a Sinclair Standard Neck Turning Tool # NT-1000
http://www.sinclairintl.com/.aspx/pid=3 ... ng-Mandrel
With appropriate mandrel
http://www.sinclairintl.com/.aspx/pid=3 ... ng-Mandrel
Don't let go of that load, because your above evidence of working up to the load show great promise and that three shot group might be for real. Also, use Nosler brass if you can and when you get it don't resize the new Nosler brass load it as is.