nvbroncrider
Handloader
- Aug 20, 2011
- 3,085
- 3
Since your using Redding dies here's the micrometer seater.
http://www.midwayusa.com/product/269962 ... winchester
http://www.midwayusa.com/product/269962 ... winchester
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
I could be wrong but I think this is the conversion they are talking about.Dr. Vette":1wzntfrr said:nvbroncrider":1wzntfrr said:Redding does make micrometer seater plugs for their dies to replace the standard plug. They are pretty slick and if I recall correctly run about $35 and are interchangeable between some calibers depending on which plug they take. Go to midwayusa and check them out.
Unfortunately again, none listed for 7mm Weatherby.
The Forster ones are $54 through Grafs under dealer price. I'll see how this goes along as I progress the next few months. I suspect that with my next order to Grafs I'll add it on at that time..
nvbroncrider":3na6z388 said:Since your using Redding dies here's the micrometer seater.
http://www.midwayusa.com/product/269962 ... winchester
Oldtrader3":1ory218j said:I bought a small bottle of Dychem Blue. It has lasted for several years and is still liquid if I need it to check sizer die setup. A blue marker works but drys harder and faster.
Dr. Vette":7ax93o9p said:Thanks.
Of course, it will be Dad taking the elk this fall with these loads and rifle. My 7mm shoots OK with the factory ammo we have here. However, I will likely work on that one in the future.