Need help with loads for a 30-06 150gr. ab

[Melmac]

Hey guys I'm new to the forum and was wondering if anyone has load information for a 150gr AccuBond in a 30-06. I've been trying H4831 but didn't get the results that I was looking for. Would H4350 give me better consistency? Any suggestions on seating depth my Sako will only allow me to get with in .145 of the lands?


Thanks Melmac

 

[Anonymous]

The Nosler Reloading Guide #5 lists RL19 as the most accurate powder in the 30-06 with the 30-150 AccuBond bullet.
Start load: 57.5gr
Max load: 61.5gr
As always start low and work your way up carefully.

Really as far which powder will work better in your rifle will take some tinkering. H4350 might work in your rifle and not in others so play around with different loads. Good luck and welcome to our forum.

 

[clearwater]

With 58 grains of IMR4350, many of the bullets are touching in an old
Springfield. I haven't got a chance to chrono them yet. 150 accubonds.

 

[Ol` Joe]

I`ll second IMR4350. My Sauer M200 loves the 150 gr BT over 58.5grs.