Need load for a 243 with 90gr. NAB

[muleman]

I have a Rem 700 ADL in .243 shortened and scoped - ready for my son's first deer hunt. I'm looking to load some 90gr NABs up and was wondering if anybody has a pet load or two. I have IMR4831,H4350,IMR4350,W760, H414 and H4831sc to work with. I have others but I think one of these will work well. Any suggestions?

Thanks,
Scott

 

[longguner]

Actually a universal load is 85 grain bullet with 38 grains of IMR 4064.

 

[JD338]

Scott,

IMR 4350 was always my go to powder for heavy bullets in the 243 Win.
Try working up to 42.0-43.00 grs.

JD338

 

[Oldtrader3]

Welcome to this forum.

When I loaded for .243, until a couple of years ago, I used 44.0 grains of IMR4350 with a CCI 200 primer and W-W brass. The combo worked really well for the 90 NAB, producing a very accurate load at about 3050 fps in my Browning, Micro A-Bolt.

 

[SJB358]

Scott, I still need to do the same with my son's rifle. I just might hunt it to use the 90 AB.. Keep the recipes coming.

 

[FOTIS]

viewtopic.php?f=5&t=20585