nosler should make a ---

[Antelope_Sniper]

225gr was the first AB made for the .338.
They shoot decent in my .338 Win Mag.

 

[Idaho_Elk_Huntr]

I would be happy if they would produce some .308 200 grain Accubonds Seconds :wink:

 

[Richracer1]

I would be happy if they would produce some .308 200 grain Accubonds Seconds :wink:

+1 on the 200AB 2nds. I'm too cheap to buy firsts and I'm not that hard up for these to pay the extra $$ for firsts.

 

[Antelope_Sniper]

A .311 BT for Bullets Lee-Enfield.

 

[cloverleaf]

90 grain BT in .257

 

[jtoews80]

I'm pretty happy to see the 140 grn AB in 6.5mm with a .509 BC.
I've moved over more to the 7mm's for hunting and can't say I need anything there. The 160AB is pretty mean too.

Nosler needs to make a 120 grn AB or Etip would give my 257 wby a bit more bite.

Or a 300 grn AB in .338, I'd say heavier like 325-340grn and get that BC up to .85 or .9, but then we'd need faster twist.

While we are dreaming bout big Accubonds, how bout a .408 AccuBond in the 350-450grn range with a bc starting with 1!

I can think of a fewplaces i'd love to hunt elk with that....... That would end the SMK LR hunting saga effective as soon as we had a couple good field reports.

JT.

 

[jmad_81]

.277 140 gr. E tip or 150 gr. AB
.284 120 gr. AB or E tip
.338 225 gr. E tip.

Preasure rings on all E tips couldn't hurt.

 

[Antelope_Sniper]

Alot of votes for the 7mm 120gr AB.
I could drive that about 3900 out of my STW.

 

[JD338]

Alot of votes for the 7mm 120gr AB.
I could drive that about 3900 out of my STW.

A 7mm 120 gr AB would be a hot item for Nosler for sure!

JD338

 

[.405]

I think it was a mistake for Nosler to discontinue the .458 300 grain partitions.
That was the best 300 grain .45/70 bullet going.There are a lot of people that shoot .45/70's.
Also, a limited run of .405win 350 grain partitions would be nice.Especially with the revival of the old round. Lyman even offers a bullet mould for it,and T/C offers a barrel.

 

[Antelope_Sniper]

Here's what it would look like with a 400 yard zero:

Calculated Table
Range Drop Drop Windage Windage Velocity Mach Energy Time Lead Lead
(yd) (in) (MOA) (in) (MOA) (ft/s) (none) (ft•lbs) (s) (in) (MOA)
0 -1.5 *** 0.0 *** 3907.8 3.500 4068.3 0.000 0.0 ***
50 1.1 2.1 0.1 0.2 3791.0 3.395 3828.6 0.039 6.9 13.1
100 3.1 3.0 0.4 0.4 3674.8 3.291 3597.6 0.079 13.9 13.3
150 4.5 2.9 1.0 0.6 3559.4 3.188 3375.3 0.121 21.2 13.5
200 5.2 2.5 1.7 0.8 3445.0 3.086 3161.7 0.163 28.8 13.7
250 5.1 1.9 2.8 1.1 3331.6 2.984 2956.9 0.208 36.6 14.0
300 4.3 1.4 4.1 1.3 3219.4 2.884 2761.2 0.254 44.6 14.2
350 2.6 0.7 5.7 1.5 3108.6 2.784 2574.4 0.301 53.0 14.5
400 -0.0 -0.0 7.6 1.8 2999.4 2.686 2396.7 0.350 61.6 14.7
450 -3.5 -0.8 9.8 2.1 2891.9 2.590 2228.0 0.401 70.6 15.0
500 -8.1 -1.6 12.3 2.4 2786.2 2.496 2068.2 0.454 79.9 15.3
550 -13.8 -2.4 15.2 2.6 2682.5 2.403 1917.0 0.509 89.5 15.5
600 -20.7 -3.3 18.5 2.9 2580.8 2.312 1774.5 0.566 99.6 15.8
650 -29.0 -4.3 22.2 3.3 2481.3 2.222 1640.2 0.625 110.0 16.2
700 -38.6 -5.3 26.3 3.6 2383.9 2.135 1514.0 0.687 120.9 16.5
750 -49.7 -6.3 30.8 3.9 2288.8 2.050 1395.6 0.751 132.2 16.8
800 -62.6 -7.5 35.8 4.3 2195.9 1.967 1284.6 0.818 143.9 17.2
850 -77.2 -8.7 41.4 4.6 2105.3 1.886 1180.8 0.888 156.2 17.5
900 -93.8 -9.9 47.4 5.0 2016.9 1.807 1083.8 0.960 169.0 17.9
950 -112.5 -11.3 54.0 5.4 1930.6 1.729 992.9 1.036 182.4 18.3
1000 -133.5 -12.8 61.3 5.9 1846.0 1.653 907.8 1.116 196.4 18.8

 

[BigPW]

110 grain AccuBond in 6.5

 

[JD338]

A__S,

Your STW would shoot as flat as road kill! :lol:

JD338

 

[Antelope_Sniper]

Thanks JD.
It would be lots of fun! :grin:

 

[JD338]

Thanks JD.
It would be lots of fun! :grin:

Point blank to 500 yds! I guess so. :lol:

JD338

 

[DavidReed]

Forget grooves on the E-tip. Instead come out with a true drive-band design like GS Custom uses on its HV bullets for the E-tip. Otherwise all we reloaders are going to have is version A, B, C...etc. of the TSX. Drive Bands probably wouldn't be a bad thing for Nosler's Solids either.

I'd like to see:

300 gr. .338 AB

250 gr. .338 E-tip

275 gr. .338 Partition semi-spitzer.

Otherwise Nosler has the bases pretty well covered

 

[JD338]

I'd like to see:

300 gr. .338 AB

250 gr. .338 E-tip

275 gr. .338 Partition semi-spitzer.

Otherwise Nosler has the bases pretty well covered

DavidReed

I like it!

JD338

 

[FOTIS]

Not to be greedy, but how about a 325 and 400 .416 AB?

I am in! :twisted:

 

[Woodycreek]

6mm 105 grain BT and .243AI brass.

 

[bludog]

Another vote for the 150 gr and 120 gr AB in .284.