Pulling Bullets?

[.300winmag]

I pulled some bullets from some .300 win. mag. loads I had loaded with Rl-22 this evening. I resized them and am planning on trying some loads out with RETUMBO this weekend. However, in all but one of 20 cases, there is a granule of RL-22 stuck in the flash hole. My inclination is it will not affect anything what so ever, but, I was wondering what you guys thought or if you had any tricks for getting it out without pushing out the primer.

Right now my plan is to load and shoot! Any objections?

 

[Alderman]

Can you knock it out with a blast of air? Personally I would try a few and see what happens at the shooting range.

 

[kraky]

I usually tap the bottom of my cases w/a lee powder dipper..like a mini plastic hammer. Sometimes there's moisture in air compressor air...not sure I'd like that.
If they don't dislodge....load and shoot away.

 

[M7025-06]

I'd load and shoot. That 1 little granular shouldn't hurt a thing.

 

[Horsethief]

One piece of powder isn't going to be noticed. Shoot it.