Hi all, wanting Quickload 357 sig info using a Sig x5 with 5 inch barrel, Sierra .355 125gr JHP,OAL 1.140,Powder ADI AP100 & AP70N. Max pressure ? SAAMI 40,000 CIP 44,000. Thanks in advance.
Cartridge : .357 SIG
Bullet : .355, 125, Sierra JHP 8125
Cartridge O.A.L. L6: 1.140 inch or 28.96 mm
Barrel Length : 5.0 inch or 127.0 mm
Predicted Data for Indicated Charges of the Following Powders.
Matching Maximum Pressure: 40000 psi, or 275 MPa
or a maximum loading ratio or filling of 111 %
These calculations refer to your specified settings in QuickLOAD 'Cartridge Dimensions' window.
C A U T I O N : any load listed can result in a powder charge that falls below minimum suggested
loads or exceeds maximum suggested loads as presented in current handloading manuals. Understand
that all of the listed powders can be unsuitable for the given combination of cartridge, bullet
and gun. Actual load order can vary, depending upon lot-to-lot powder and component variations.
USE ONLY FOR COMPARISON !