162 ELD-X and MagPro in a 7mm Rem Mag

pharmseller

Handloader
Feb 13, 2012
550
79
Anyone using this combo? Ramshot lists 71.5 gr as max for the 162 A-Max, Hornady lists 69.3 gr as max for the ELD-X.

Shooting a T3 with WLRM, Rem brass.




P
 
I hit the range today to try out some loads. Very interesting.

First up was the 160 Partition at 3065 fps. Pretty good accuracy, surprisingly mild recoil


IMG_0235_zps6iuk8sx8.jpg


As usual, the first two were closest and the dang third shot was out.


Next up was the 162 ELD-X at 2962. Slightly better.


IMG_0233_zpsm3irsmj0.jpg



I took a .223 with me and shot that while the barrel cooled. It was 45 degrees and a bit windy so heat wasn't an issue.


Next up was 160 NAB at 3045. It's the three shots circled. I shot three more while the barrel was hot and started spraying. So don't shoot 6 rounds quickly.


IMG_0234_zps7eebit8m.jpg



During a cease fire I recovered the Partition and ELD-X targets. Interesting, the bullets shot to very similar POA. For fun I posted one more target and shot both bullets at it. Three Partitions, wait, four ELD-X, wait, three more Partitions. If it weren't for the first ELD-X to the right, it wouldn't be a bad group.


IMG_0236_zpstpwvycmc.jpg



The first two shots are the two to the left of the bull. I hate the third shot!






P
 
Back
Top