Latest activity

What's new New posts New media New media comments New profile posts Latest activity
  • S
    SJB358 replied to the thread Die to press alignment.
    No idea. I mostly use a Forster Coax which should help with the problem all the way around. I’ve just gotten into the habit of keeping...
  • S
    SJB358 replied to the thread Anyone have load recipe for fire forming 264 Win Mag with faster powder?.
    You technically don’t need an expander. Not sure if you have access to a set of dies that are 7mm? You could swap the expander rod...
  • S
    SJB358 replied to the thread .264 130/140 AB.
    Good intel Phil. Never thought of sorting them like that.
  • S
    SJB358 reacted to Idaho53's post in the thread 7mm Rem Mag load data error? with Like Like.
    So many variables...barrel quality/length, brass, etc...I have had really good success in several 7RM shooting 160 grain bullets using...
  • S
    SJB358 reacted to DrMike's post in the thread AccuBond 375 Cal 260 Grain Spitzer 54413 with Like Like.
    I recognise that bison. I remember how the younger bull hooked him with his horns, as if to say, "Get up! Not so tough now, are you!"...
  • S
    SJB358 reacted to Blkram's post in the thread AccuBond 375 Cal 260 Grain Spitzer 54413 with Like Like.
    Guy, thanks for posting the link to this thread. I do not recall seeing this back in the day. (Always fun to revive an old thread!) As...
  • phil
    phil replied to the thread Die to press alignment.
    Never dealt with this myself, but is there a way to orient the shell holder to allow for self-adjustment of the case as it’s pressed in...
  • JD338
    JD338 replied to the thread Henry 243 long ranger.
    42.0 grs IMR 4350 and 100 gr bullets shot well under MOA for me in a M70 XTR 243 Win. JD338
  • JD338
    JD338 reacted to SJB358's post in the thread Henry 243 long ranger with Like Like.
    I’d try the 42 grains of H and IMR4350 with the 100’s. Your 1-10 will stabilize them fine. Let us know how you make out.
  • JD338
    JD338 reacted to SJB358's post in the thread Nosler 28 Reloading with Like Like.
    Just for what it’s worth the temp stable part of stuff is a bit overrated in my opinion. Definitely a thing if you’re redlining stuff in...
  • S
    SJB358 replied to the thread Die to press alignment.
    TD are you saying you’re seeing .003” runout after a case is sized of .003” run out after seating a bullet? The reason I ask is I had a...
  • Ridge_Runner
    Ridge_Runner replied to the thread Ford Trucks..
    just put a reman engine in my '03 Ram 3500, reman short block and 60 over HP injectors was 13K
  • T
    TackDriver284 posted the thread Die to press alignment in Reloading.
    I use Redding full length non bushing and bushing dies along with competition seating dies on a Redding Boss press. I use the trusty...
    • oring.JPG
  • S
    SJB358 replied to the thread 375 H&H & 260gr Accubond.
    I use RL16 in my 375 Improved with the 250 TTSXs for about 3000 last I checked. IMR4350 made nice fire form loads with 300 grain...
  • Joe C.
    Joe C. reacted to SJB358's post in the thread 7mm Rem Mag Quickload Request with Like Like.
    Same here Jim. A 7 Rem was my first BG rifle. I used it for woodchucks, deer, bear, crows, moose, coyotes, caribou. If I was a smart...
Show older items
AMMUNITIONAmmunition BULLETSBullets BRASSBrass FirearmsFirearms GearGear
Back
Top