Latest activity
-
TI started with the 280 Rem and then the 6.5x55 in the late 80s and mid 90s.. Since then, I have enjoyed the experimentation with various...
-
JD338 replied to the thread Its on the way ! my new BAR !.I use the 250 gr AB in the 338 RUM as my go to bullet for crop damage deer hunting. It performed flawlessly on countless deer, internal... -
WWis65x55 replied to the thread Bullet vote please.What ever shoots best in your rifle. I will add that the ballistic tip is also very good!
-
IIdahoCTD replied to the thread What's your go to hunting load (Pet Load) for your 6.5 PRC?.I shoot 147 ELD-M's for everything up to elk. I like 54.7grs of R-26 in virgin Peterson brass or 54.3 in once fired with a CCI 250...
-
-
Probably a 3x9x40 in 30mm tube from zerotech . I had a few leupold before and the zerotech is clearer and brighter than thay ever where...
-
JD338 replied to the thread Bullet vote please.Either one will work just fine. I’d pick the one that shoots the best. You can also use the Ballistic Tip. Grab some seconds to some...
-
cjmac replied to the thread Bullet vote please.I was thinking the accubond cause its tip wouldn't deform as much . But at Short ranges it probably wouldn't matter much. I just wasn't... -
cjmac replied to the thread Bullet vote please.I should have added that we only have a max shot of 165 yards here on the one long narrow shooting lane . Most common shots are 90-100...
-
Heavy Barrel posted the thread What's your go to hunting load (Pet Load) for your 6.5 PRC? in Reloading.Back in late March I got myself a Tikka T3x Lite chambered in 6.5 PRC and picked up some 140gr Norma Whitetail to sight-in with. After... -
Either one will work. Whichever your gun shoots better. The accubond would have higher BC but probably not much of a consideration...
-
Either one will work. Whichever your gun shoots better. The accubond would have higher BC but probably not much of a consideration... -
So after doing a lot of reading which I probably shouldn't have done lol Sounds like the accubond is kinda like a bonded partition with...
-
BI confess I've never bought or used any Nosler brass, not for any particular reason, simply that my dealer has Norma on the shelf...
-
BYes sir! I've used a good bit of Norma brass as well, and it is excellent.
-
PPJGunner replied to the thread What's your 280Rem loads?.This probably won't be a lot of help but my pet load for the .280 Rem. is 57.8 gr. WMR (Winchester Magnum Rifle) under a 160 gr. Speer...
