Ralt71's latest activity
-
Ralt71 replied to the thread Best Tasting Animal?.So hard, Pheasant is up there for me, Quail is close behind it. Moose or Bison are close the top with Elk coming in third I have to note... -
Both Natchez and Scheels have them , 200gr JSP...
-
The Whitetail line has been huge for Nosler. They are adding additional cartridges and bullet weights to this product line. I would...
-
I ordered one for my 224 Wby after I get my new barrel on. With a stainless barrel this could look pretty neat.
-
Ralt71 replied to the thread Seating depth.I think what Blkram stated here is the biggest factor in what you are seeing right now. Like he said, to prove or disprove this. Set...
-
If you have a long throat, you will have more jump to the rifling, and once you have hit max coal for your magazine, you may not be able...
-
Thanks everyone. Manny is almost finished with his 2nd round of antibiotics. He's getting up and moving around a little better each day...
-
Many of you know we lost our oldest son on 4/8/26. While we where staying at the hospital family members were taking our dog out and...
-
Don't mean to sidetrack this thread, but would like to see your review after you have rung out the new NX6! (What reticle did you go with?)
-
Ralt71 replied to the thread New girlfriend.Great looking rifle!
-
6 BRA built by Bat Machine. Need to look for a scope and rings from EuroOptics. Once the rifle is dressed up, I will clean the rifle...
-
Ralt71 reacted to Wolfshead's post in the thread Another question for all us hunters: Favourite method? with
Like.
I hunt Whitetails, and I love to still hunt in the thick, close, woods here in the northeast. Love finding the main trails, and going... -
55 grain bullets go very fast from the well-worn 22" barrel of my 6mm Rem, but the 75's have always grouped better and are excellent on...
-
You could easily use 55 BT or 58 grain VMaxs if you were so inclined. The jacket on the 55 BT and other is plenty thick to take about...
-
Ralt71 replied to the thread To anneal or not?.I don't want to complicate this, but all you are doing is returning the brass to a more soft state after being work hardened. Too much...
