xphunter's latest activity
-
xphunter replied to the thread Thank you xphunter ( Ernie ).Enjoy!!! You have the skill to be competitive, once you start playing with the bigger cartridges in the wind -
A package came from Fed Ex, it was no usual cardboard package, tapped on it and it was solid wooden crate, after opening it, packaged in...
-
at longer distance shooting , a faster twist rate will cause more spin drift . it's just something that you have to figure out .
-
I agree with Scotty as not worrying about over twist within reason. Example, first two 6brs I had were 1-12 or 14 twist. Couldn't use...
-
here's an average per twist for 320k rpm 7 @ 3,110 7.5 @ 3,330 8 @ 3,550 8.5 @ 3,770 9 @ 4k bullet construction is the only thing...
-
xphunter replied to the thread .257 Roberts hunters only.Ballistic Tip or AB will work for sure. Partition would work great too
-
Howdy, I am having built a .257 Roberts AI on a Remington model 7 action. I am an avid reloader, shooter and hunter. I am new to the...
-
What got me to thinking about twist rates is I have a 22-250 and a 25-06 that both had standard twist for the time built but are too...
-
Agree with you, and I am also excited about the quarter bore bullets coming out. Just finished a 25 CM with 128 ELD-X bullets. Shoots...
-
Hodgdon's online data center shows load data for the 140gr Hornady ELD-M bullet, but that data will work. Start on the low end and work...
-
Cartridge : 6.5 Creedmoor Hornady Bullet : .264, 140, Nosler BalTip 26140 Useable Case Capaci: 45.161 grain H2O =...
-
Sorry 6.5 creedmoor
-
Looking for info on reloading nosler 140 BT with Staball 6.5 , don't see anything listed on the website
-
xphunter replied to the thread Did well in Pistol Competition today.Good Shooting Guy!
-
xphunter replied to the thread Whitetail bullet options.The back of the partition should pass through easily
