Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
I am not trying to say, I am a terrible shooter.I don’t know about that , you make those handgun shots look so easy. A 2 minute plate at 600 yds with my Striker is my limits.
Try in .3 increments with 3 shot groups. It helps find your nodes. I like it in small increments as in .3 because I have missed a node here or there using larger increments. I dug out my old notes and found an older post / test using H4350 and Bergers @ .090" off the lands to fit the magazine. Those Hybrid OAL are so long if seated close to the lands and won't fit my mag. https://forum.nosler.com/threads/little-range-time-with-6-5-creed.46757/#post-510878Mark, thank you for your thoughts. Yes, I have a .263" expander. I just ran it through the remaining 14 new cases that I have. I will try the same load as the last one above the .263" expander.
I have H-4350 but I have been saving it for once I have fired 50 of the new cases. I have a lot more of RL-16 so I have been using that to fire the new cases. So far, I have mostly been trying to get a feel for charge weight vs velocity and bullet jumps. Both the 129 gr. ABLR and the 120 gr. BT seem to like about a 0.030" to 0.035" bullet jump.
I found that the Lapua brass has much less case volume (and greater case weight) than the Hornady brass from factory loads.
I have loaded some cartridges faster, but the accuracy was less. But, I am still very early in this project.
Nice shooting RR!4shots at 1003 yards shooting 140 gr eldm's in factory loads.....from an AR10
![]()
Ernie, it is funny, but since I know your intentions are to help me when I read your original post, my mind read it with the "NOT" included. I really thought you wrote "this is NOT about outclassing".@NYDAN,
Typo in my last post that I just fixed.
What it should have said to begin with..."This is NOT about outclassing anyone or any gun."
I didn't have the word "not" in the original one. I have corrected that.
Great shooting out of a gasser.4shots at 1003 yards shooting 140 gr eldm's in factory loads.....from an AR10
![]()
Good.Ernie, it is funny, but since I know your intentions are to help me when I read your original post, my mind read it with the "NOT" included. I really thought you wrote "this is NOT about outclassing".
I do truly appreciate everyone's comments and insights. There are so many people on the forum who have more experience, knowledge, and skill than I do. It is a constant learning process for me.