Kimber 84L 7x57 Mauser

SJB358

Ballistician
Dec 24, 2006
33,108
4,998
This rifle started as a 84L in 30-06. Sent it off to the smiths with a Lilja 84L Modified 1-7” SS barrel.


IMG_3452.jpeg

I mounted scopes and did some measurements to get it up and running. I did a pressure check from 47 to 51 grains of Super and a Hornady 180 ELD.

51 grains was making over 2700, I went back home and loaded a handful of cartridges with that charge and checked them on paper.

Anyhow, till after hunting season, this will be good enough. The gun doesn’t have 20 rounds over it yet, so I’m thinking once it gets a 100 rounds thru it, everything will settle down and it should shoot.IMG_3513.jpegIMG_3479.jpegIMG_3500.jpegIMG_3506.png
 
Wow! 2700 with a 180 out of the that classic is impressive, dang it wants to shoot too!
I saw some other folks had done Kimber 84L’s in 7x57 and it made sense. The action OAL is a bit tight with 06 length cartridges with long bullets but with the 7x57 case being a bit shorter it really allows optimum seating of a long bullet with some space.

Then I was perusing Hornadys data and saw they had 7-08 data with Super and 175/180’s at 2600+ using 2.800 OAL. Well my brain said if I can take a bunch of bullet out of the case, which will free up some room and add a bit of capacity I should get some useful speeds.

IMG_0392.png

So, I started towards the high end of the 7-08 data, and bumped a 1/2 grain at a rip till I was on/about 2700.

The beautiful part of this rifle is it holds 4 down nice, and it feeds like it has eyes.

The only bummer with the entire deal is brass. I’d have loved to snag some Lapua 8x57 brass but right now, I’m using Norma 7x57, I necked up to 308 and back down for a snug fit on first firing. Seems like it’s working well so far.
 
Wow! is right. I do love the 7X57. It is a grand caartridge that'll git 'er done.
For sure Mike. Since my boy got the first one, I’ve liked it. Now there are 3 in the house but it’s been such a good cartridge.

Speaking of which I should pull his out and check the zero. He might wanna hunt a bit when he gets home on leave.
 
I've found that the Norma brass worked fine for me when I was loading a lot of 6.5x55 back in the late 90s. Never annealed, and yet got lots of reloads per case, but then again, I was staying within max limits as per the current manuals (Nosler and Barnes) of the time. IMR 4350 was working well for me.
 
Norma is middle of the road stuff these days. I think it’s quality stuff, but compared to Lapua, Alpha and ADG it’s hard to compete. But you take what you can get. I’ve used a lot of Norma through the years and it’s not until you dig into the really good stuff does the light go on. At least for me it did.

There’s no money savings buying cheap brass. One of my biggest lessons I’ve learned.
 
I use Norma brass in my 7x57 #1. The only problem I run into pushing over 61k is extraction. The #1 action is strong the extractor is very weak. When I get up around 64k I’ll occasionally have to tap the case with a cleaning rod, just a tap and it’s not every case.
 
I use Norma brass in my 7x57 #1. The only problem I run into pushing over 61k is extraction. The #1 action is strong the extractor is very weak. When I get up around 64k I’ll occasionally have to tap the case with a cleaning rod, just a tap and it’s not every case.
Makes sense. With those long bullets it’s absolutely nothing much gained if all you could do is 2600. Their BC does all the work. Lots of good ones to try if a guy was so inclined.
 
Nice rifle set up.
I have a pile of Superformance , it does make serious horsepower in everything I’ve tried it in just not benchrest accuracy. It will make decent hunting loads though.
 
Back
Top