Search results

Thanks Dr. Mike ! Sent from my HUAWEI Y536A1 using Tapatalk

Thanks Dr Mike , it's not the pockets in question, it's the ignition of the primers ( why some left a heavier deposit than others ) . Sent from my HUAWEI Y536A1 using Tapatalk

165 gr Nosler BT Sent from my HUAWEI Y536A1 using Tapatalk

Do I need to re work a load if I switch to BR2 ? The current load is at 56 gr of Imr4350. for 3006 . Thanks. Sent from my HUAWEI Y536A1 using Tapatalk

My phone won't post the quotes. Thanks Tjay. Rick, I read about indexing cases ( the same position in the chamber where they are once fired ) I'm not going to sweat it though ! Dr. Vette, no I didn't uniform them ! I still have the charges still wrote on the cases when I did the work up...

Is this a sign of inconsistency? ( ignition inconsistency) ?

Yeah , fatigue sets in. I retested that 56 gr load at only 20 shots. I'll work on depth , h and bumping up the imr and see what happens !

I do have one lb of h 4350, I'll start in the middle ! Thanks, Ray

Thanks SJB358 !!!!!!

Thanks EM, I know the weather changed the speed , I had to adjust elevation. I kept in mind to hold on target the exact same way. Will seating depth change the speed ?

Thanks DH ,it takes about 4 or 6 to get it going. I shot my rifle 53 times the day I shot my test loads I sighted in my Nikon 3 9 /40 with factory before I started

Thanks WT, that bottom target is the 56 gr load except the bottom left diamond , that is the factory Noslers with each round from a cold bore.

Thanks guys , the factory ammo and my ballistic tip loads did well while it was warm. I have the factory depth and my 20 thou loads. If possible, I'm looking to compensate for pressure loss if that is the case ? If do 57 gr load, I wonder if would equal to somewhere around 55 or 56 charge ?

This is the 56 gr Imr 4350 165 gr bt 3006 load shot at 35 * ish all Cold Bore shots. 1st target bottom left is fouling shots , cold bore. Factory nosler 165 gr AB 1st target center diamond I put 3 in the same hole ( this was a warm barrel ) What can I do for this load ? Top target is...

Thanks Dr. Bette, it was nice to see that jug on the ground and ripped to shreds !

Thanks Scott !

Thanks Scott, poi was 2" left and the elevation was right in line with the bull at 168 yards, is this what you mean by dead on ? There was hardly any wind. We are shooting factory NBts 120 gr. Ray

A month ago my 11 year old son and I zeroed his scope. This rifle is a vanguard s2 7mm08 youth, I just shot it again at 100 yards to confirm zero and it's still good ( he did the shooting the first time ). So I decided to shoot a milk jug full of water at 168 yards , this is the furthest...

I haven't tried h4350 yet, although I do have a pound of it. I want to shoot my 56 gr load again before I take it to the field. Are you shooting your three shots back to back ? Or do you let it cool in between ? With my s2 , when the barrel begins to warm up I'll have one slightly move...

I don't know if you have seen my target pics I posted ? I'm going for the upper middle load and it would be nice if I was getting close to 2800 . I think I'm gonna get the magnetospeed. I shoot the van s2 3006 too .