Search results

Good to know. Thank you !!!!!

Thanks , I got me a 1000 CT lot today while the gettin's good.

Yeah ! I suppose it is , oops lol

Yeah , I remember seeing this. Is the .590 the group size ?

Very cool ! Is that an all factory rifle ? Long chamber !!!!! My COAL for vanguard s2 is 3.343 " with a 165gr BT. Ogive touching ! I guess I have a short / normal chamber dimension. I've been trying to figure that out

That's great ! Thank you. They say what ever a rifle likes this seems like a winner of the majority! !!! ??? Like the .308 175 gr. and varget.

Have you been using those Fed. 210s and W760 for hunting in cold Temps ?

Too cool , out of curiosity, does this put you 2 or 3 thou off the lands ? I'm at 3.343 COAL when ogive is touching the rifling for my vanguard s2. and 165 gr BT.

Wow ! I was under the impression that you had to make adjustments according to the weather . Thanks for the info !

Thank you Dr Mike , yeah Speers manual # 14 is where I read about mags and starting loads for ball powder. Rem. uses klean bore primers for their scirocco line and ball powder , but I no nothing about klean bore. The question does come up about factory ammo with ball powders and mag primers...

Thanks Fotis, that looks great !

From what I have read , ball powders need mag primers for a starting load ,so what about WLR primers that Nosler calls for ? Are WLRs suitable for cold weather ignition ?

Thanks Guy , I enjoy looking at the results from these reloading manuals. I've been reading over old posts and thought maybe someone might have the recipe on paper that I will attempt. Thanks, Ray

3006 165 gr BT or AB ; H / IMR 4350 with your primer and coal ? Thanks, Ray

Thank you for posting this . What primers , how far off the lands and what size is the largest group ? Good shooting !

Apologies, I should have been clearer. I was checking my trim tool to see what depth it cuts to. I'm gonna be using new Nosler brass , I'm basically getting to know my equipment with cheap brass. I understand about trimming and hot loads now , thanks. I would like to know a little more...

Thanks guys, I will be FL sizing, I'm using the Neck sizer for deformed case mouths. In my mind ,by sizing the whole neck, I was thinking in terms of seating a bullet a calibers depth and that would mean to me having that much tension. So that's why I'm trying to understand. Please...

I know 3006 should be trimmed to 2.484 , I have the Lyman trimmer that chucks in a drill but it cuts down .007" shorter. is this a concern ? When neck sizing , how do you know if you are sizing the whole neck ?

Yes I am ! I had fun just foolin' around and seeing how it works , too cool !

Hey fellas' , I built my desk from 3 doors and gave this press a little work out on my once fired Rems. I think I got the shoulder position set to the once fired position. I followed rcbs instructions and it set the shoulder 2 or 3/1000 back . I turn the die up until it matched the once...