Search results

Is there a bedding material out there made to bed factory synthetic stocks like Remington, Winchester, Ruger, etc....? I have a Remington 700 XCR and I'm not quite sure the existing epoxy bedding products will stick to what appears to be more of a plastic stock than anything else. Brownells...

Thanks for the help with the photo, JusMo.

Sorry about the pic, folks. I haven't mastered posting them yet. If someone wants to load it for me I'd be happy to email it to you.

My good friend's son, Ketih was fortunate to draw a limited entry elk tag on the Utah Wasatch unit this year. After blowing the stock on this big 6x6 bull we quickly setup hoping for a shot as the bull worked his cows out of the bottom and up the other side of the canyon. The cows cleared...

What is the sectional density and ballistic coeficient of the 250 grain .338 Accubond?

POP, thanks for the help with the pic. I would amagine Cheyenne is crawling with antelope and deer hunters this time of year. I used to be one of them before I got a serious case of elk fever in Utah. Thanks again, Victor

Here is a beautiful 373 7x7 bull elk taken by my cousin this past September on the Utah, Wasatch limited entry elk hunt. The bull was shot from a very long distance with a custom .300 Ultra Mag using handloaded 180 grain Nosler Accubond bullets. The bullet hit the back side of the shoulder...

[/img]

My 15 year old son dumped a nice 6x8 bull elk in Wyoming during the fall of 2007. His .300 WSM was having trouble so he ended up hunting with my .270 WSM loaded with 130 grain Accubond bullets. We found 8 bulls late in the morning feeding on the far side of a large meadow. After an hour and a...

I built a custom .375 RUM on a Winchester Model 70 action, 26" barrel. I put a Vais muzzle brake on it. I shoot 260 grain Accubond's using IMR4350 powder and Remington 9 1/2M primers. Average muzzle velocity is 3,140 fps. It stays under an inch at 100 yards from a bench. So far I've made one...

I shoot a Christensen Arms/Winchester Action .300 Ultra Mag. My pet load is 96.0 grains RL-25, Federal 215 primer, and the 180 grain Accubond. Average muzzle velocity over an F1 Chrony is 3400 fps. A very sweet combination in my rifle. I wish I could find just as sweet of load for my 7MM...

Did Nosler discontinue making the Ballistic Tip for the .338? I hope not. I really like the bullet for smaller big game and target shooting.

Hmm. I've been working on developing a load for my Sako 75 in 7mm RUM. So far I haven't been able to get the 160 grain Accubonds to group at all using Hogden powders. I purchased a box of 160 grain Barnes TSX's to try as well. I also purchased a pound of RL-25 and RL-22 to see if I could get...

Thanks for the kind words, gentlemen. It was a fun experience. I'm glad to hear, and see, the Accubonds are working well for allot of folks. I went with this bullet in my .375 because of a Wyoming hunt I went on last year with two of my good friends. Both of them pulled the trigger at the...

I built a custom rifle on a Winchester action and chambered in the .375 Remington Ultra Mag. Something I plan to take to Africa sometime down the road. I started loading with 94.0 grains of IMR4350, and a Remington 9 1/2M primer and a 260 grain Accubond. My rifle allowed me to load up to 96.0...

So, does Nosler have published reloading data for the 7mm Ultra Mag yet? jbdre, thanks for posting some data for the 160 grain Accubond. If there is suggested load data for the 140 grain Accubond I'd like to get that as well. On a personal note, I'm enjoying a facination with the big Ultra...