Search results

if the ones with the cannelure are also the PPT , they should fly the same . I haven't seen the cannelure make any difference in the exact same bullet .

it just slides in and out .

this is the one I use .

I'm really happy to hear this .

this past Saturday was spring gobbler youth day .the lease had 4 youth hunters ,1 girl , 3 boys . 2 were successful ,1 boy , 1 girl . quitting time is noon . it rained and at times fairly hard until around 10am . the 2 unsuccessful hunters stayed out until noon . one was in a blind the other...

last Saturday was youth day for spring gobbler . our lease had 4 youth hunters , 2 were successful . one bird was shot at 40 - 45 yards . both used a 410 shooting TSS #9 shot . the guys are buying savage / stevens single shots , they come with a cheap red dot sight , and cost around $150 - $200...

the Marlin XT22 rifle I bought the Boyds stock for , has a different set up . the rear bolt goes into the action . the front bolt goes in a threaded bushing . this bushing is dovetailed into the barrel . the bushing floats in the dovetail . what holds things lined up is stock pressure against...

No , I didn't see where getting pillars was an option . this Marlin is a weird set up , how it mounts . I'm going to give it a try in this new stock , and hopefully it shoots well from a bipod .

the Boyds stock arrived yesterday . Carter chose "coyote " for the color , this surprised me . I thought I'd be ordering the green zombie killer , he is really into green . everything fit except , the trim around the magazine / clip . that trim piece fit a little too snug , it wouldn't...

I weighed ten of each on my FX120i scale . after this experiment , I'm sure I'll not use a coin for a check weight . LOL quarter . 87.62 , 87.40 , 87.86 , 88.52 , 87.16 , 88.34 , 87.46 , 86.08 , 87.82 , 87.80 dime 34.92 , 34.44 , 34.62 , 35.08 , 35.34 , 34.76 , 35.22 , 34.58 , 34.76 ...

I do just as Dr Mike laid out . I reuse them and I've never had a problem , or mishap . has anyone ever soaked a primer and tried to fire it ? I never have tried this . I've read they are very hard to kill .

looks great . I was starving for meatloaf , and just made one last week . it's one of the few dishes I make, that always tastes great . chili is next on my list .

if I was going to get into the cell cameras , I'd take a look at the Cuddie back system that has a master camera and the other cameras link to the master camera . I think you can link up to ten cameras . this system uses one phone plan . I haven't researched it , only what I kind of remember...

very nice , you're a lucky Pappy

I've never tried to test warm ammo shot in cold temps . I don't know how I could have repeatable conditions . I have tested cold , and very cold temps with my labradar . I put everything in the truck and let the truck set out over night . go to our range set up and shoot . I needed to do...

I did goof in my previous reply . I'll edit it now . yesterday I wrote I like to work in the 100 - 105% case fill , that is wrong . I like to be in the 95% - 105% . I like to work in the 95% - 105% case fill . I'll work a little over 105% , and I'll work a little under 95% , but I try to...

I have no problem loading the full 60% reduction . if I were you , I'd round the 23.7 grain off to 24.0 and start loading . watch for low PSI signs . usually it's hangfire , and primers backing out , smoke back the brass case body . I have not seen these while using H4895 . I've used...

you are seeing the same thing I am . I don't need to adjust my die , to keep contact between the die and shellholder regardless of what shellholder in the set I'm using .

yes that case fill % is safe . I like to work in the 95% - 105% case fill range , at max load . what you are seeing is , this powder is a little slow for this combo . you are going to see a higher case fill , and a lower velocity . this powder maxes out at 50.1 grain 110.7% case fill ...

this is what I use . I run it with a cordless drill . I've done 222 rem to 338 Lapua , 41 rem mag , 45 acp https://www.midwayusa.com/product/1012881432?pid=720825 the trimmer you have pictured , I don't think you need anything else to go along with it . the problem I see with it is ...