Search results

If there are "seconds" for someone living in Oregon, please let me know. John

I have a 35 Whelen, 35 Whelen AI, a 375 Whelen AI, and a 9.3x63mm all on Mauser actions. Of those, the 9.3 is my go to rifle. Just sayin... John

Let's not all jump on him and beat him down..... On second thought, that's exactly what he deserves.

All this high tech.... My old school barrel bobed and suppressed 581 Remington toys with MOA accuracy off the bench at 100 yards with Norma TAC 22 subsonic on a calm day and even better with R50. Not saying this is the be all 22 rimfire, but that old rifle can stack them into a tight group...

I have only found speed with these bullets, the accuracy is marginal.

If I push it hard, I can get a 150 LRAB going 2700 fps out of the 20" barrel of my 700Ti

GRT => Gordon's Reloading Tool is like Quickload, but is free and not as comprehensive. My 416 Taylor sports a 24" barrel, but 83.6 gr of RL-17 pushing a 350 Speer GS delivers 2622 fps and 5344 fpe in my rifle. It's a max load, and you really don't need to load it that hard to get performance in...

Greetings from another 416 Taylor owner. GRT shows these max loads with a 25.5" barrel: 72.0 IMR 4064 2527 fps 73.0 IMR 4166 2528 fps 79.0 RS Big Game 2560 fps If you can find some RL-17 it really makes the Taylor hum.

5.5 lbs according to a different spec sheet I found. If you were looking for a compact rifle for a float plane, it might have a purpose. Personally I'd opt for an additional 18 ounces and take my Rem 700 Ti in 7mm-08

Rikers Island Room for 1 Please.....

I have the same rifle in my safe. One rifle to rule them all.....

Where did you hear that RL-26 is being discontinued?

When I'm shooting 150s in my 270, I use these loads: 150 Nosler LRAB 61.0 RL-26 Fed 210 Fed Case 3.492" 3084fps 150 Nosler LRAB 60.0 I7828 Fed 210 Fed Case 3.492" 3004fps

I'm gathering the dies needed to swage 30 caliber bullets to .287" for use in my Ross M1910. I'm not getting into the bullet business, but rather just planning on helping out shooters who need fat 7mm bullets for their rifles. Additionally if you happen to be a member of the...

He took 17 million to walk out the door. It was the last insult before he goes. If he was run over in a NYC crosswalk, I'd shrug, and keep walking. If Hillary was behind the wheel, I'd have to reconsider her political future.

Interesting in that the real world difference of the head diameter between the .470" of the 9.3x62mm and the .473" of the 30-06 is on paper rather than reality. As an example: US manufactured commercial brass measures a bit larger, but I've not seen any larger than .470"

The question is: Is the 30-06 a descendant from the 9.3x62 gene pool?

I have a 35 Whelen, a 35 Whelen AI, a 375 Whelen AI, and a 9.3x63, and the last one i would let go of would be the 9.3x62.

I just saw some today at a BiMart in Eugene. It's out there.

I would reserve judgement on the state of the pistols sights until you spend some time at the range with it. Years ago I took a co-worker to the range to shot my Gold Cup. He fired 5 rounds, then looks through the spotting scope to see his results.... a blank target. He tells me that the...