Search results

140 Accubond, 47.5 gr Big Game, WLRM primer, 2850 fps, big 5x5 bull, one shot at 225. Same load, 303 yards, antelope herd buck, one shot. 140 Partition, same load, 2874 fps, 4x4 bull, one shot at 68. Same load, spike bull, 346 yards, one shot. Same load, big fork mulie, 541 yards, one shot...

If so his English is excellent. P

I should have included the bullet, huh? 162 ELDX, velocity measured by a Magnetospeed, so I'm confident in the accuracy. This load is safe in my rifle, not yours, start low and work up. P

http://www.shootersproshop.com/loading- ... jax/1.html $23.20 or $20.20 doesn't sound expensive to me. P

Vanilla 7mm Rem Mag, 69.0 gr R26 gets me 3100 on the dot, single-digit extreme spread, and .539" groups. I would expect significantly more from the Weatherby. Otherwise, what's the point of the Wby cartridge? P

Do you full-length (FL) resize or neck size only? P

Here's a good resource: https://load-data.nosler.com/load-data/ ... remington/ I speak from experience in reloading the 140 Accubond in 4 7mm-08s. All Tikkas, all 47.5 gr Big Game, Winchester Large Rifle Magnum primer, 2.805". One shot one kill antelope at 303 yards, big 5x5 bull elk at 225...

I always heard a triangle needed a longer OAL. P

That's all you bought? P

I think I'll focus on 68.5 grains and try a seating depth test. P

First off, ow. That SOB is a kicker! R26 results, Magnetospeed Sporter, two shots each, three charge weights, 3.290" OAL. 160 AB: 68 gr 3007, second shell wouldn't chamber, I blame Antifa 68.5 gr, 3039, 3042, avg 3040, es 3 69 gr, 3056, 3060, avg 3058, es 4 162 ELDX 68 gr 3036, 3030, avg...

What kind of info do you guys need? At this point in my sophistication I'm looking for mv ave, es, maybe sd. P

Good timing, I bought the Sporter this morning. It's not for handguns, so if that's a deal killer don't buy the Magnetospeed. P

You're welcome, but I'm just passing along wisdom from those much more experienced than I. P

I got this advice on another board: The first thing I recommend is to ignore the instructions supplied with the die. The second thing I recommend is to ignore whether or not the press you're using cams over at the top of its stroke. The die squeezes the neck onto a mandrel, so for a given...

All I do is neck size these days with my Lee collet die. Here's the deal: brass fired in a specific chamber will expand to fit that chamber. You don't need to full length resize (for 5-6 firings, anyway) since the brass conforms to that particular chamber. You need to match brass to a...

Tikka barrel is 22 7/16" P

Hornady has data for RL26 and 162 ELDX, but Nosler has no data for RL26 and 160 NAB (I called). I hear RL26 is the bee's knees in the 7mm Rem Mag. Anyone have experience with it and the 160 NAB? P

Deer, elk, antelope. My dad killed a big 5x5 bull with a single 140 AB in 2015 from his 7mm-08. P

Were you shooting at 200 yards? P