Search results

New safe , I’ve been down that road now I have 3 safes😁

Is the brass new , or do they have the number of firings on them? Trim length the same?

Today was the first time out this year as expected some rust to shake off. Besides the H4350 Creed test and the Sub 308 , I tried out a new scope I mounted on the 375 Wby this winter. I had sent the scope I had mount on it back to Crimson Trace. I took a generic load of 270gr Speers and Hybrid...

Back around the first of the year I toyed around with the Hornady 220gr RN and TiteGroup for subsonic loads. Not that I could finally have time to hit my range , I tried them out. My S2 Vanguard has a 1:12 twist and I found that to be a handicap. They impacted 18.5” low on my 208gr A-max zero...

Digging this up again. Today I had a chance to run H4350 in this test. The only difference today is I’m using my Garmin and the Striker has a different brake that won’t allow the Magentospeed to mount. 44grs is all one can load in this case.

Either the Barnes or the Nosler AB will serve you well in the 270.

My #1 rule never sell a rifle😁. Good news that your 243 Win found its way home.

My Kano Kroil is a pinkish orange. I’ve found that CRC makes the equivalent to Kroil with their Knocker Loose as a penetrating oil.

Hoping they each have a speedy recovery and make it home safely.

Look like your 1911 project is coming along nicely.

Congrats on a double bear success.

I’ve not used IMR 4831 but one thing to keep in mind is milder loads of slow burning powder tend to run dirty until acceptable pressures are met.

Words well spoken. As people age some take the easy way and for you , you’re choosing to keep the body and mind sharp.

From my experiences it is hard to be the Nosler 64gr BSB for a .224 cal with young hunters.

5 mph wind should show less than 1/2” at 100yds. A bi-pod that’s not being preloaded on a slippery surface is not ideal for load development. Anytime a variable is introduced into a load , I start from scratch. 2 years ago I picked up some CCI 250s and they were a pain when used in my 338WM.

Nice trophies so far from the Nosler members.

I’ve been using their MP-521 in place of BL-C2 with good results. It is a tad slower than the BL-C2.

Dug back to find my 460 with the 404s. https://forum.nosler.com/threads/404gr-shock-hammer-460-wby.44227/

Nice to see it back on the shelves again. I picked up some earlier this spring for a 458 WM project.

The 90gr AH have been little stinkers it 2 of our 257 Wbys. This summer I might try H4350 and see what I get. The 124gr HH and 404gr SH soot great for me.