Search results

Some load results from my 26" 1:7 twist 22 Creedmoor 75gr Hornady Amax @ 2.63” OAL .114” jump to lands Alpha Brass Federal 210M large rifle primer H4350 41.4grs - 3403 FPS H4831sc 44.2grs - 3302 FPS IMR 4451 39.3grs - 3256 FPS IMR 4955 43.2grs - 3381 FPS IMR 4955 43.6grs - 3453 FPS IMR...

result from a 120gr NBT started at about 2600 fps. Pancaked it one shot 150 yards frontal, bullet penetrated 3' and exited behind the ribs

His rifle is a Fierce Titanium, has a longer 25" tube and a mag box that enables me to load out to 2.92" OAL which helps free up a bit more room for powder. 67.5grs of RL26 is the load we settled on. Had it up to 70.0grs / 2975 fps but the odd shell extracted with a hint of stickyness.

Hunting partner took this nice buck with his 300WSM 200gr Accubond @ 2890 fps. One shot through the timber @ 85 yards into the high shoulder. He snapped off his G2 on the right side making him a 7x3. Very heavy bodied

I'd go 160gr Accubond, should have a slight edge over a Partition as the distances grow longer. Not that it really matters, dead is dead, but why not use the best?

129gr Accubond Long Range, impact speed approx 2200 fps Entrance Exit Bullet was not recovered

thanks guys he was smile from ear to ear all night. The load was 33.0grs H4895 Bullet nicked the top of the heart and exited the chest, unrecovered. Buck hunched up hard at the hit and just about went down, wobbled for a few yards then piled up

So proud of my 10yr old nephew he got his first deer this evening. 90 yard one shot kill with a Remington Model Seven 260 Remington shooting 129gr Nosler ABLR @ 2325 fps.

I've measured h20 in R-P 25-06 brass fired in a Wby MkV UL @ 68.1grs

Cartridge : .45-70 Gvt Marlin 1895 Bullet : .458, 350, Swift A-Frame FN Useable Case Capaci: 57.312 grain H2O = 3.721 cm³ Cartridge O.A.L. L6: 2.550 inch = 64.77 mm Barrel Length : 18.5 inch = 469.9 mm Predicted Data for Indicated Charges of the Following Powders...

It's my hunting partners Fierce Ti. We assumed it was 24" until we measured it one day. Shoots awesome

Some nice results with RL26 in a 25" barrel 300WSM 180gr Accubond 72.3grs RL26 Nosler brass Rem 9.5M ~ 200gr Accubond 70.0grs RL26 Nosler brass Rem 9.5M ~ 68.6, 69.3 & 70.0 all landed inside .32" @ 100y

you bet. No issues with a 17 Hornet, heck even a .177 BB tracked out to 15 yards.

I've been using one for about a year now. Fantastic piece of equipment

well for all you who crave a 224" 55gr lead free ballistic tip - this is your year!! For the rest...maybe 2017

How about some left hand Accubonds. Or any Accubonds? :lol:

Nosler BT 40 - 22.8grs 3250 fps - Nosler BT 50 - 21.9grs 3095 fps - Nosler BT 55 - 21.8grs 3040 fps - Berger 52 Match FB Target - 22.6 grs 3130 fps

Most anywhere in the US won't ship up here so it's a moot point. My point is I have had it on order through a Canadian distributor for two years with not a single box making it up to me yet. :(

Ive had Nosler 260 brass on order for two years up here in Canada with zero delivery. :(