Search results

  1. T

    243 95 grain BT?

    I used to use IMR4350 with around 41.5 grns then I went to Hogdon4831ssc. Both gave me pretty good groups. I then tried some of my friends IMR7828, loaded a group and holly cow! I have to look in my log for the actual load but it crono'd about 100FPS more than any prior load and gave me great...
  2. T

    Tight cases

    I also own a 270WSM. I had the same problem when loading with IMR 4350 at 69 grns. After a few reloads I found them very hard to chamber. I backed off to 68.5 grns and have not had the problem.
  3. T

    Never thought I'd be reloading for a shortmag . . .

    My 270WSM loves IMR4350, 61.3 grains. Fed215M primers pushing the nosler 130Gr balistic tip. Shoots half MOA every time. I have yet to shoot 150gr in it, if I need the larger bullet I go to my 300 mag.
  4. T

    Looking to make a 25/300 wsm

    http://www.cutrifle.com/ This guy is up near Prescot,AZ Here chambered the 25/300WSM and called it a 25 pronghorn I think. One of the shooting Mags did an article on it and said it was very fast and accurate.
  5. T

    magnum primers?

    I am using CCI bench rest primers. Har dto find the federal primers here. As for powder I am using IMR 4350 in my 270 WSM and IMR 7828 in the 300 Win Mag. Not at home right now so I can't give you the charges I am using but both are just a little over medium in the Sierra manuel. I bought some...
  6. T

    223 WSSM , 22-250 or 220 swift?

    Looking to replace my Ruger #1. I have a .223 and my daughter has taken it over. Trying to get a few ideas or thoughts if you would. I have owner a swift in the past and loved it. Most of the three I have listed are on my list. The WSSM leaves me with only one choice in rifle, Browning A-bolt...
  7. T

    magnum primers?

    Thanks for all the help. I figure cutting the loads back about 10% or should I drop down more?
  8. T

    magnum primers?

    Not near max loads. Thanks for the info.
  9. T

    magnum primers?

    Loading for a 270WSM as well as a 300 Win Mag. My velocity spread from high to low average about 50-60 FPS. I am using CCI bench rest primers, uniforming the primer pockets and trim all to same length. The cases are also wieghed. A friend of mine told me that I should switch to a magnum primer...
  10. T

    Forester co ax press

    Anyone have one and do they like it. My 20 plus year old rockchucker is starting to get lots of play in it. Trying to find ideas on new press.
  11. T

    Need a newer small caliber. Any ideas?

    I have taken numerous game, deer, javelina and varmits with both the 25-06 and the 243. I liked the 25-06 it reached out a little further. The game I have shot could not tell the difference between the two. I like the short action for less weight but them put a huge bull barrel on it! Both...
  12. T

    Nosler BT and CT bullets

    Savage 12FVSS varmit.
  13. T

    Nosler BT and CT bullets

    Bought a box of 130 gr CT for my 270 WSM. Went out this morn and shot them In the 26 inch barrel they shoot average of 3350FPS and they actually shot tighter groups than the BT. Great bullets. Must be my rifle likes the coating.
  14. T

    Nosler BT and CT bullets

    Acurracy wise and or performance on game?
  15. T

    Nosler BT and CT bullets

    I have been loading the balistic tips in several of my rifles and they shoot great. Been thinking of playing with the CT silver tip. Are they the same bullet with the coating on them or are they completely different design? The BT's worked great on the deer I have shot but they idea of less...
  16. T

    Coues Deer and Nosler Balistic tips

    Switched to a 95gr nosler balistic tip this year for hunting. I had been using another brand with good results but tried these while playing with different loads. Found they shot great out of my Shilen .243 win on a Rem 700 action. Getting 1/4 to 1/2 average groups at 100 yds. At 400 yrds I...
Back
Top