200gr.accubond reloads for 8mm mauser.

[beakmaster]

Has anyone got good load DATA for 8mm js Mauser loads using the 200 gr.AccuBond?Or should I just lighten loads that I use for the 150gr.solid base bullets?

 

[Anonymous]

You can substitute the 200gr Partition loads for the 200gr AccuBond in your 8x57mm JS Mauser from the Nosler Reloading Guide #5. Here's the Varget load which was our most accurate powder.
Starting: 43.5gr (most accurate)
Max : 47.5gr
Federal cases and WinWLR primers.
As always start low and work your way up carefully.

 

[Val]

I'm getting good results using 44 grains of Varget.

 

[Eagleye]

If your Mauser is a good strong one, you may want to try my load for the 200 Partition/AccuBond. It is in a Winchester Case, fired by a WLR Primer. 56.0 grains of Vihtavuori N-160. [Start at 53 grains] The 56 grain load 'graphs just over 2600 in my 700 Remington and shoots fabulous groups. I'm after a moose this fall with mine. Regards, Eagleye.