- Thread starter
- #21
Yoteklr
Work, load, shoot, hunt, repeat
- Apr 19, 2022
- 260
- 514
Thank you very much. I feel like I owe you.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
I have several barrels worth of n570. I'm a fan.If you can find some V570, I am pretty sure you'd really like the numbers it puts out in your 30 Nosler. It is sized about like charcoal, but danged if it isn't accurate and fast.
Looks sharp, it will be neat to see what loads you end up with. Love to see you working with the other Nosler rounds like the 27 in particular and 28 too.Got the rifle put back together this morning. View attachment 21785
Good startThe barrel is getting broken in and seasoned. I'm almost done firing virgin brass.
Today got out to 200yards with 185 Juggernauts and H1000. View attachment 22009
View attachment 22010
In case you are wondering, I adjusted my scope after. When I shoot out my aim point I cant see a precise aim point, lol.
Those are virgin. When I bought these Nosler cases from Midway they sent 3 different lot numbers. That one lot weighed 3.5gr more than the rest...and was 3.5 gr less water capacity. I was wanting to see what the velocity difference was. It was about 35 fps. I shot those for foulers.Nice shooting, does the primers look like it has some some cratering? How is the bolt face, if I may ask? Primers on the right looks pretty flat. Any pressure?
I had my bolt bushed once for the same reason where the primer material flowed around the firing pin hole.Those are virgin. When I bought these Nosler cases from Midway they sent 3 different lot numbers. That one lot weighed 3.5gr more than the rest...and was 3.5 gr less water capacity. I was wanting to see what the velocity difference was. It was about 35 fps. I shot those for foulers.
This is a sloppy Savage 110 action. The firing pin hole is too large, I should get it bushed.
That is one of the most annoying things a rifle can do in my book. Remingtons were notorious for me with this. Tikka's spoiled me.. M70's have been 50/50 for the trait.I had my bolt bushed once for the same reason where the primer material flowed around the firing pin hole.
The 180 Ballistic tip is my go to bullet for all my friends' guns. All 30-06 and 300 mags. Never recovered one from elk from 30 yards to over 400.