does anyone know the case capacity difference in hornady vs nosler brass? looking to do some reloading using some nosler brass with 200gr accubonds and H1000. have been using hornady brass in the past with 208 amax. was thinking my charge weight for the amax would be a good place to start with the accubonds but didn't know how to adjust for different brass. read the accubonds like a jump so a .100" jump in my chamber would be at 2.800" to ogive. barrel is a 26" shilen. read a post on here where someone had great results using 77gr H1000 with 200gr accubonds but didn't state brass used. was thinking of using that in my hornady brass as ive been using 76.8 with the amax anyway but really wanted to use this nosler brass I have.
also while on the subject, who makes .300 win mag black hills match brass? have several of these too i could use. read it was Winchester then read again someone posted it was norma? how does case capacity on these compare to hornady and nosler?
also while on the subject, who makes .300 win mag black hills match brass? have several of these too i could use. read it was Winchester then read again someone posted it was norma? how does case capacity on these compare to hornady and nosler?