DrMike
Ballistician
- Nov 8, 2006
- 37,300
- 5,939
For all the rifles I test, the rifle rests with the front action screw on the bags. Further forward, and there is often enough pressure on the barrel to change harmonics significantly.
Accuracy Vanished! Update May 06
- Thread starter ScreaminEagle
- Start date
- Thread starter
- #22
ScreaminEagle
Handloader
- Jan 20, 2011
- 1,373
- 0
Thanks guys. I'll track down the problem and give you a report.
- Thread starter
- #23
ScreaminEagle
Handloader
- Jan 20, 2011
- 1,373
- 0
Well, I just scrubbed the crap outta my barrel. I can't believe how much crud came outta there! I thought I did a great job cleaning my guns. I also made up some new loads, with the bullets seated into the lands. I will work up a new load and hopefully my accuracy is there. Will update later.
Guy Miner
Master Loader
- Apr 6, 2006
- 17,743
- 5,790
"Well, I just scrubbed the crap outta my barrel. I can't believe how much crud came outta there!"
Don't be surprised if it takes a few shots for the rifle to "settle down" and group well again after a major cleaning like that. May or may not happen. I sure can't predict which rifles will so behave.
Don't be surprised if it takes a few shots for the rifle to "settle down" and group well again after a major cleaning like that. May or may not happen. I sure can't predict which rifles will so behave.
DrMike
Ballistician
- Nov 8, 2006
- 37,300
- 5,939
Rifles have their own individual characteristics. We can speak in generalities about what is needed for accuracy, and we discover that the rules don't apply to the one we are shooting.
- Thread starter
- #28
ScreaminEagle
Handloader
- Jan 20, 2011
- 1,373
- 0
SJB358":2x4kt4x7 said:
Kroil and JB bore paste applied with VFG super intensive cleaning pellets
- Thread starter
- #30
ScreaminEagle
Handloader
- Jan 20, 2011
- 1,373
- 0
SJB358":kbtq2be1 said:
Really black stuff. Kinda like oil sludge. I made about fifty passes through the tube with the bore paste and kroil. Then I cleaned it all out with kroil. Kroil is red in color, so I just went until I had a nice red patch without any black on it.
ScreaminEagle":3iyg8f0y said:
That is exactly the way mine look. It is amazing the amount of carbon that comes out of the tube when you aggressively work at it. Kroil and Iosso/JB is pretty amazing stuff. I am sold on it. Saves on the amount of waiting you need to do. Plus, it really allows you to clean up the throat area pretty quick.
- Oct 30, 2004
- 24,249
- 2,951
When are you shooting it?
- Thread starter
- #33
ScreaminEagle
Handloader
- Jan 20, 2011
- 1,373
- 0
FOTIS":2cij42ai said:
Well, I'm not sure. As soon as I can get to the range. It's been raining and storming here that last couple of days.
- Thread starter
- #34
ScreaminEagle
Handloader
- Jan 20, 2011
- 1,373
- 0
Ok guys, I scrubbed my barrel out real good with the kroil and JB paste. I check the OAL with my hornady gauge, and loaded up some 100gr BT's to the lands. I used H414 as it has always given the best performance in my rifle. I loaded in .5 gr increments from starting to 2gr over max, and shot a ladded test at 300yds. 45gr and 45.5gr showed less than an inch of vertical, so I have loaded up twenty rounds using 45.3gr of H414. I will shoot these through the chrono to check the SD and accuracy as well. I'll let you guys know what's going on.
DrMike
Ballistician
- Nov 8, 2006
- 37,300
- 5,939
That sounds positive.
DrMike
Ballistician
- Nov 8, 2006
- 37,300
- 5,939
Not much.
- Oct 30, 2004
- 24,249
- 2,951
ScreaminEagle":2huhatze said:
Can not wait!
Similar threads
