critterskinner
Beginner
- Sep 21, 2009
- 55
- 0
I reloaded and shot some loads for my .22-250 today. After firing I noticed a slight bulge about a 1/4" up from the base of the case. What is this?
Bulge
- Thread starter critterskinner
- Start date
- Nov 4, 2004
- 24,947
- 7,876
That is the web area of the case and it has expanded under pressure from the burning powder (gas) to seal the chamber.
JD338
JD338
- Thread starter
- #3
critterskinner
Beginner
- Sep 21, 2009
- 55
- 0
That means there is nothing to worry about?
- Nov 4, 2004
- 24,947
- 7,876
critterskinner
As Ol' Joe said, normal case expansion.
Mic the diameter and post it so we can confirm.
JD338
As Ol' Joe said, normal case expansion.
Mic the diameter and post it so we can confirm.
JD338
It is where the case goes from being solid at the case head to a thin wall and it will expand to fit your chamber
In a very bad chamber the expansion will be pronounced but a little expansion is normal.
Here is a pic of a 30-06 that shows a little of what you are talking about
In a very bad chamber the expansion will be pronounced but a little expansion is normal.
Here is a pic of a 30-06 that shows a little of what you are talking about
- Thread starter
- #7
critterskinner
Beginner
- Sep 21, 2009
- 55
- 0
I took a measurement with my micrometer and it is only .001 over.
- Nov 4, 2004
- 24,947
- 7,876
critterskinner
You should be fine.
Woods,
Thanks for the detailed pictures.
JD338
You should be fine.
Woods,
Thanks for the detailed pictures.
JD338
critterskinner":20kf41cp said:
Here is pretty good article on case expansion
http://www.jamescalhoon.com/primers_and_pressure.php
