TN deer hunter
Beginner
- Dec 21, 2004
- 73
- 0
Anyone have a good load for a Browning BAR 30-06 w/22" Bbl? I have some 130gr TTSX, 150gr SST's, 165gr Partitions, and 150gr Accubonds.
Good Loads for a BAR Lightweight 30-06?
- Thread starter TN deer hunter
- Start date
- Oct 30, 2004
- 24,190
- 2,850
h4350 is your powder.
Larry in SD
Handloader
- Nov 8, 2004
- 426
- 1
If a .30-06 won't shoot 150gr. Bullets (I prefer 150gr. Nosler Ballistic Tips) loaded with H-4350, it probably isn't going to shoot anything else any better.
I am loading 150gr. Nosler Ballistic Tips for myself and 4 buddies with H-4350. Each rifle is a bit different as 2 of these rifles prefer a grain less powder than the other 3. The only other difference is in the cartridge overall length for each individual rifle.
Larry
I am loading 150gr. Nosler Ballistic Tips for myself and 4 buddies with H-4350. Each rifle is a bit different as 2 of these rifles prefer a grain less powder than the other 3. The only other difference is in the cartridge overall length for each individual rifle.
Larry
Curtis Pittman
Beginner
- Nov 5, 2009
- 25
- 0
54 grains of Win 760 powder and 150 grain Nosler Ballistic tip.
This is the same powder charge used by Winchester on their 150 grain Silvertips.
This is the same powder charge used by Winchester on their 150 grain Silvertips.
